FJ Opti-Crimp 50/125μm multimode duplex fiber optic jack module with phosphor bronze split sleeves for 3.0mm jacketed cable or 900μm tight-buffered fiber installation.
Features:
- TIA/EIA-604 FOCIS-6 compliant connectors
- Exceed TIA/EIA-568-B.3 requirements
- Insertion loss: >3dB typical (50/125μm)
- Return loss: >20dB
- Pre-polished mechanical crimp termination eliminates polishing and adhesive, reducing installation time by 70% over field polish FJ Jack Modules
- Non-optical disconnect maintains data transmission under tensile loads for jacketed cable
- Mechanical crimp cable retention consistently provides higher than industry standard cable retention
- RJ45 small form factor duplex jack module -- double the port density in one module space
- Mini-Com Jack Modules snap in and out of all Mini-Com closet products and work area outlets
- Each duplex jack module includes housing, cover, two ferrule assemblies with pre-polished fiber stubs, two crimp sleeves, one boot for 900μm buffered fiber, one boot for 3mm jacketed cable, and one dust cap
- Can be clearly identified with labels and icons
- Fiber cable type: tight-buffered only
- Fiber cable size: 900μm tight-buffered fiber or 3.0mm jacketed cable
- Ferrule type: 2.5mm zirconia ceramic (highest durability for repeated matings)
- FJ Opti-Crimp Jack Modules and crimp tool allow visual verification of optimal continuity during crimp termination with the FVFLKIT Visual Fault Locator Kit (included in FJMVKIT Termination Kit)
- Use Opti-Crimp Termination Kit (FJMVKIT)