DP5e Angled Punchdown Patch Panel shall terminate unshielded twisted 4 pair, 22 – 26 AWG, 100 ohm cable and shall mount to standard EIA 19" or 23" racks. Industry standard single wire 110 punchdown tool shall be used for terminations. Patch panels shall be supplied with T568A and T568B wiring configurations. Ports and panels shall be easy to identify with write-on areas.

Features:

• Exceeds TIA/EIA-568-B.2 Category 5e and ISO 11801 Class D standards
• Each port is 100% tested to ensure NEXT and RL performance and is individually serialized to support traceability
• Utilizes 110 termination on back panel and includes retention cap for each port
• Each port contains a universal label that is color coded for T568A and T568B wiring schemes
• Angled versions allow for higher density installations by easily routing the patch cords to each side of the panel eliminating the need for horizontal cable management
• 48 port angled: 3.47"H x 19.0"W x 4.77"D (88.1 x 482.6 x 121.2mm),2 RU
• Packaged with M6 and #12 - 24 mounting screws
• Mounts to standard EIA 19" or 23" racks (23" requires use of extender bracket)
• 12 port suitable for wall mount with 89D bracket
• Write-on areas follow TIA/EIA-606-A labeling standards
• Backwards Compatible