Hubbell Pedestal Series Painted Aluminum 2 Inch Through-Floor Fitting Poke-Through
(Model # PT27A)Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice.
Through-Floor Fitting Features:
- Through-floor fitting to be installed in a 2" diameter hole - Pedestal Series Mounting
- Contains 3/4" EMT tube for low-voltage cabling and 1/2" EMT tube for power wiring for use with Hubbell FR280, FR480 and FR880 series pedestals
- This unit will accommodate floor thicknesses of 2 1/4" to 7"
- Fire Rating: For use in 1, 1 1/2, 2, 3, or 4 hour rated unprotected reinforced concrete floors or in 1, 2, or 3 hour rated floors employing steel floor units and concrete topping (D900 series design)
- UL Installation Spacing: Minimum of 2' on centers and not more than one unit per 65 sq. ft. of floor area in each span
- Power Wiring Capacity: 1/2" EMT Power Tube Handles: Up to ten #12 AWG type THHN wires OR Up to six #12 AWG and two #10 AWG type THHN wires
- Voice/Data Wiring Capacity: 3/4" EMT Low-Voltage Tube Handles: Up to two 25 pair telephone/data cables (100 #22 AWG telephone/data conductors) OR Up to two IBM Type 2 data cables
- Total Allowable Copper Cross Sections: 0.11 sq. in.
- Pedestal Rule of Thumb: Any combination of wire that does not exceed the total allowable copper cross sectional area is acceptable
- Pedestal Series Listing: Outlet Box: E31999, Fire Resistance: R8429