PCMSYS3 Features:

• PCMZPM Zone Paging Module:
• Three zones of paging
• Can operate high-power or low-power paging systems (Only 1 type per PCMZPM module)
• A single amplifier can be used for paging and supplying background music (when not paging)
• Background music can be continuously supplied to all zones with addition of second amplifier
• Background music is always supplied with low-power operation
• Two additional zone modules can be added to system to increase capacity to 9 zones
• Relay driver is provided for each zone
• Talk-back option (requires PCM-TB)
• Set ouput from high-power to low-power
• BGM volume control
• BGM options
• Local BGM
• Screw terminals
• PCMCPU CPU Module:
• Connected to other PCM modules electrically through internal cables
• Satellite system identification via built-in DIP switches
• Locking program/run selector switch (with program LED)
• Satellite data link RCA jack
• 12V DC power source jack
• Audio connections for paging amplification
• Low power BGM
• High power BGM
• Emergency/shift change trigger and auxiliary contacts
• PCMTIM Interface Module:
• Connects to telephones via standard RJ11 plug
• Programmed by using common DIP switches
• All other connections made through built-in terminal blocks
• Zone group programming, selection of all signaling functions, and all other parameters set by simply dialing in using touch-tone telephone
• Equipped with three RJ11 jacks for night ring, TEL line, and override
• Night ringer feature activated from 90V ring signal or contact closure
• TEL line jack used to program system locally and provides 48V talk battery
• Override feature permits all-zone override paging from a dedicated telephone, trunk, or microphone (with suitable pre-amp)