IT9115-CUV In-Line Cable Ties Features:

• No protruding head to cause injury since head is inverted
• No protruding tie tip to cause injury since the tip is trapped between the tie and the foam
• Tie will not slip on the foam since the head will indent the foam to remain captive
• Wide tie body .350" (8.9mm) for improved aesthetics
• Cannot over-tension tie causing bulges in the foam
• Install by hand or use Panduit GTH installation tool
• Flexible and easy to handle
• No need to heat weld the ends closed
• No cut-off scrap pieces to handle or pick up
• Strong: 124 lb. (550N) minimum loop tensile strength
• Locking wedge is protected from unlocking and from ultraviolet light exposure
• Weather Resistant Nylon 6.6 will last 2-3 times longer than normal pigmented colors
• Available Colors:
• Red
• Bright Red
• Yellow
• Butterscotch
• Green
• Hunter Green
• Dark Blue
• Light Blue
• Cobalt Blue
• Purple
• Gray
• Charcoal Gray
• Teal
• Magenta
• Tan
• Material: Ultraviolet (UV) Resistant Nylon 6.6
• Length: 15.3"
• Width: 0.350"
• CE Compliant: Yes
• Cross Section: Light-Heavy
• Head Height: 0.300"
• Head Width: 0.556"
• Locking Style: Locking
• Material Flammability Rating: V-2
• Max. Bundle Diameter: 4.53"
• Max. Continuous Use Temperature: 185°F (85°C)
• Min. Bundle Diameter: 0.33"
• Min. Loop Tensile Strength: 124 lbs.
• Plenum-Rated: No
• Thickness: 0.065"
• Tool: Hand Installation Recommended
• Quantity:1,000
• RoHS Compliant