The NETcat® Micro wiring tester is a device that verifies twisted pair and coaxial cables. It uses high-speed digital technology to check wiring continuity and correct allocation of wire pairs.

NC-100 features:

• Tests shielded twisted pair (STP), unshielded twisted pair (UTP) and coaxial cables
• TIA/EIA standard wiring pair verification
• Detects shorts, opens, reversed polarity, crossed and split pairs
• Generates three distinct, selectable digital tone patterns for cable tracing and troubleshooting
• Tracing modes can be adjusted for high performance LAN cables
• Complete set of connector types standard (telephone, LANand coax)
• Nested remote allows end-to-end testing of all wiring types
• Simple testing of LAN wiring and phone lines
• Detection of common wiring and connector errors
• Warning of hazardous voltages
• Checks for reversed telephone wires
• Backlight : Green LED
• Battery : 9 V Alkaline Battery (PP3)
• Buttons : Four Momentary Contact Push Button
• Depth : 33.000 MM
• Display LCD : Icon And Seven Segment Type
• Frequency Rating : 577 HZ And 983 HZ
• Humidity : 0 To 95 PCT Non-Condensing
• Interface Connections : RJ45 Shielded Socket, RJ12 6-Way Socket, F-Type Threaded Female Coaxial Connectors
• Length : 150.000 MM
• Minimum Cable Length : 2.000 To 3.000 MR (5.000 To 10.000 FT)
• Pair Tracing Tones : Alternating Frequencies Of 577 HZ And 983 HZ Are Produced At Three User Selectable Rates
• Standard : TIA/EIA
• Storage Operating Temperature : -10 To 60 DEG C0 - 50 DEG C
• Type : Micro Digital Voice Data And Video Wiring