The NETmapper is a hand-held multifunctional network-testing device that supports On-Line and Off-line tests. It operates ping network device with the IP address for the On-Line test and it functions as a cable checker for the Off-Line test.

Features:

• On-Line test; Displays the Ethernet port status, Ping default router, Ping DNS Server and Ping user defined device. etc.
• Off-Line test; Wire map test. Twisted mapping test, cable length test, Tone generator and port finder.
• Wire map for open, short. reversed, cross, split, mis-wire, and shield continuity
• Wire map result are displayed in a pin-to-pin format
• Indicates the serial number of remote for identification in a wire map
• One RJ45 ports on main unit for cable map test without remote
• Measures twisted pair length (Cat5, Cat5E, and Cat6) without remotes
• With self-calibrating ability for non-standard cables (length test) for an increase in measuring accuracy
• Use both measurements (meter and feet) standards for cable length display
• Incorporates Port Finder function: locates corresponding socket on hub/switch
• The Tone Generator sends 1K Hz tone on all pins with 4 special tonalities
• Large LCD display
• Battery powered, with low battery indicator
• Comes with 4 remotes