Multi-functional network cable tester. In addition to detecting basic wire connections like open, short, mis-wired and split pairs, it can also measure the cable length using TDR (Time Domain Reflectometer) technology in real time. LANsmart displays the results in pin-to-pin format. When there is any open/short fault in the cable, LANsmart will detect, locate, and display the fault. LANsmart can also send out audio signals to help find the corresponding cables; users can also send out auto negotiation signals to find out the corresponding hub/switch ports. Compact, ergonomic, and easy to operate. Advanced functionalities and versatility make LANsmart an ALL-IN-ONE tester suitable for all professional technicians and installers.

LANsmart Cable Tester Features:

• RoHS compliant
• TDR (Time Domain Reflectometer) Technology
• Tests for shorts, opens, mis-wires, reversals, split pairs, and shield continuity
• Built-in PORTfinder to locate corresponding sockets on hub/switch
• Measures length on UTP and STP cable without remotes
• Velocity of Propagation Adjustable Calibrate ability for non-standard cables to increase measuring accuracy
• Locates problems in both meter (m) and feet (ft) standards
• Tone Generator sends signals to either all or selected pin conductor/s
• Test results displayed in pin-to-pin/Wiremap format
• Compatible with any twisted pair of category 3/4/5 and 6 cables
• Battery operated, compact and easy to use

Specifications:

• Display: 122 x 32 Dot Matrix LCD (56mm x 29mm)
• Connector Type: RJ45 (main & remote)
• Accuracy:
• ± 2m < than 10m (± 6.56 Feet in < than 32.81 feet)
• ± 5% > 10m (32.81 feet)
• Approximate test range: 1-500m (3.28 – 1640.42 feet)
• Split pair detection minimum: 1m (3.28 feet)
• Tone Generator: 1 KHz
• Operating Temp: 0~50 degrees C
• Storage Temp: -30~50 degrees C
• Humidity: 10 to 90%
• Dimensions: 82 x 138 x 32 mm
• Power Source: 3 x AAA Alkaline Batteries
• Safety Approval: CE
• Battery Life: 4 hours continuous use