Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice.
The V-Tap Analog II is a hardware and software solution for the recording of telephone calls. The supplied hardware unit can record the audio from an analog telephone line or any telephone that works with a cord-connected handset.
V-Tap-Analog II Features:
Recording: analog telephone calls and analog audio
Caller ID detection: via DTMF or FSK if available
SD-card slot: yes, storage of WAV files
Wi-Fi: supported
LAN: RJ45
PABX: RJ10
PHONE: RJ12
Audio connector type: 3.5 mm circular TRS
Connector function set by switch: Stereo OUT, Mono
IN+OUT, Stereo IN
Switch position#1: Stereo OUTPUT
Switch position#2: Mono INPUT+OUTPUT
Switch position#3: Stereo INPUT
Level: 1- 700 mV RMS (software setting)
Impedance: 2500 Ohm
Bandwidth: 4 or 8 or 16 KHz
Phantom power: 2.2V DC
AGC: Limiter range>40 dB with Noise Gate
Level detector range: Available, Range 0-250 mV RMS
Primary use: Electret Microphone
Level: 50 – 2000 mV RMS (software setting)
Impedance: 150 Ohm
Bandwidth: 4 or 8 or 16 KHz
Primary use: Amplified Speaker
USB Version: V2.0 High Speed (480 Mbps)
USB Profile: Generic HID (VID: 0DE1 / PID: 5202)
USB Current: 5V @ 500mA (Max. 3 W)
USB Connector: Full size ‘B’- type
Power Supply: USB powered
Button: One button, see manual for button functions
LEDs: Four LEDs, see manual for LED functions
Dimensions (L x W x H): 137 x 81 x 30 mm
Housing material: Silver and Blue, 4 pieces soft rubber footpads