The K-1775-IP Series entry phones provide a tough and attractive handsfree phone for apartment, and residential door entry or applications requiring a vandal resistant VoIP speaker phone with built-in proximity card reader and Analog Color Video Camera.

View IP SIP System:

Compatibility List

K-1775-IP Features:

• Built-in high resolution analog NTSC color video camera with wide viewing angle tilt/swivel adjustments and wide operating temperature of -40°F to 140°F
• Built-in 125KHz 26-bit Wiegand proximity card reader with LED and beep card read confirmation and EWP board protection
• Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics, speaker/mic screen, heavy duty metal keypad and “Call” button and T-10 Security Torx drive mounting screws
• Weather Resistant Features: Marine grade 316 stainless steel faceplate, screws and push button switch
• Switch internally sealed per IP67
• Mylar speaker, Self-draining mic mount, Faceplate, mic and speaker gaskets
• Compatible with the following Viking proximity cards and fobs: PRX-C, PRX-C-ISO and PRX-FOB
• Available in 2 standard faceplate finishes: 316 brushed stainless steel with laser etched graphics or oil rubbed bronze powder paint with copper metallic graphics
• Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
• Optional RC-4A for Secure Remote Relay Control
• Blue “Call /Status” LED indicator
• SIP compliant (see pg 2 for list of compatible IP-PBX phone systems)
• PoE powered (class 2, <6.5 watts)
• Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
• Network downloadable firmware
• Programmable to speed dial up to 250 numbers
• Cycles to roll over phone number on busy or no-answer
• Program up to 1,000 keyless entry codes and/or proximity card numbers
• Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
• Call logging with time and date stamp
• Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating
• Hangs up on busy signal, time-out or touch tone command
• Extended temperature range (-40°F to 140°F)
• Volume adjustments for microphone and speaker
• Selectable auto-answer feature for monitoring
• Zinc plated steel rough-in box included
• Optional VE-6X7 Surface Mount Box available
• Optional VE-LIGHT kit to illuminate the front panel at night
• Self diagnostic reports via email (testing com, mic, speaker & switch)

Specifications:

• Power: PoE class 2 (<6.5 watts)
• Dimensions: see Installation and Specifications
• Operating Temperature: -40° C to 60° C (-40°F to 140°F)
• Humidity - Standard Products: 5% to 95% non-condensing
• Humidity - EWP Products: Up to 100%
• Audio Codecs: G711u, G711a, G722 Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over Connections: (1) RJ45 10/100 Base-T, (10) gel-filled butt connectors

SKU	Finishes	Weather Protection
K-1775-BN-IP	Oil Rubbed Bronze	Standard
K-1775-BN-IPEWP	Oil Rubbed Bronze	Enhanced
K-1775-IP	Stainless Steel	Standard
K-1775-IP-EWP	Stainless Steel	Enhanced