
Viking Vandal Resistant VoIP Phone with Auto Dialer with Keypad and Entry System
(Model # K-1900-8-IP-EWP)


Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice.
View IP SIP System:
Compatibility ListK-1900-8-IP-EWP Features:
- Vandal Resistant Features:
- 12 gauge 316 stainless steel faceplate with permanent laser etched graphics
- Heavy duty metal keypad, hook switch, and armored cable
- T-10 security Torx drive mounting screws
- Weather Resistant Features:
- Marine grade 316 stainless steel faceplate and Torx security screws
- Internally sealed keypad
- Ring with adjustable volume and cadence
- Hearing aid compatible amplified handset with sealed push button volume control
- Two sets of SPDT 2 Amp relay contacts for door / gate or camera control
- Secure Remote Relay Control using Viking RC-4A
- SIP compliant
- PoE powered (class 2, <6.5 Watts)
- Network downloadable firmware
- 36″ armored handset cord
- Programmable to speed dial up to 250 numbers
- 26 Bit Wiegand input for adding a Viking proximity card reader
- 26 Bit Wiegand output can connect to card reader input of an Access Control System
- Cycles to rollover phone number on busy or ring-no-answer
- Program up to 1,000 keyless entry codes and/or proximity card numbers
- Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
- Event logging with time and date stamp
- Remotely programmable
- Extended temperature range: -40°F to 140°F
- Diagnostics (for testing relays)
- Zinc plated steel rough-in box with (2) 0.75″ conduit knockouts included
- Flush mount using the included rough-in box or surface mount using a Viking VE-6X7 Surface Mount Box
- EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards
Specifications:
- Power: PoE class 2 (<6.5 Watts)
- Phone Dimensions: 5.0″ x 10.0″ x 4.68″ (127mm x 254mm x 119mm)
- Overall Dimensions: 5.0″ x 10.0″ x 5.53″ (127mm x 254mm x 141mm)
- Operating Temperature: -40°F to 140°F (-40°C to 60°C)
- Humidity: 5% to 95% non-condensing
- Panel Material: 0.105″ thick stainless steel
- Handset Cable Length: 34″ to 37″ (86cm to 94cm)
- Audio Codecs: G711u, G711a, G722
- Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
- Connections: (1) RJ45 10/100 Base-T, (14) gel-filled butt connectors
Certifications:
- CE
- Canada ICES
- FCC Part 15
- SIP