Viking Vandal Resistant VoIP Phone with Auto Dialer with Keypad and Entry System

(Model # K-1900-8-IP)
Viking Vandal Resistant VoIP Phone with Auto Dialer with Keypad and Entry System

Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice.

  • $561.52

  • Availability:
  • Usually ships in 4 weeks
The K-1900-8-IP VoIP panel phone can either auto-dial a phone number each time the handset is lifted, be used as a multi-number auto-dialer, or be used as a standard manual dial phone.

View IP SIP System:
Compatibility List
K-1900-8-IP Features:
  • Vandal Resistant Features:
    • 12 gauge 316 stainless steel faceplate with permanent laser etched graphics
    • Heavy duty metal keypad, hook switch, and armored cable
    • T-10 security Torx drive mounting screws
  • Weather Resistant Features:
    • Marine grade 316 stainless steel faceplate and Torx security screws
    • Internally sealed keypad
  • Ring with adjustable volume and cadence
  • Hearing aid compatible amplified handset with sealed push button volume control
  • Two sets of SPDT 2 Amp relay contacts for door / gate or camera control
  • Secure Remote Relay Control using Viking RC-4A
  • SIP compliant
  • PoE powered (class 2, <6.5 Watts)
  • Network downloadable firmware
  • 36″ armored handset cord
  • Programmable to speed dial up to 250 numbers
  • 26 Bit Wiegand input for adding a Viking proximity card reader
  • 26 Bit Wiegand output can connect to card reader input of an Access Control System
  • Cycles to rollover phone number on busy or ring-no-answer
  • Program up to 1,000 keyless entry codes and/or proximity card numbers
  • Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
  • Event logging with time and date stamp
  • Remotely programmable
  • Extended temperature range: -40F to 140F
  • Diagnostics (for testing relays)
  • Zinc plated steel rough-in box with (2) 0.75″ conduit knockouts included
  • Flush mount using the included rough-in box or surface mount using a Viking VE-6X7 Surface Mount Box
  • Power: PoE class 2 (<6.5 Watts)
  • Phone Dimensions: 5.0″ x 10.0″ x 4.68″ (127mm x 254mm x 119mm)
  • Overall Dimensions: 5.0″ x 10.0″ x 5.53″ (127mm x 254mm x 141mm)
  • Operating Temperature: -40F to 140F (-40C to 60C)
  • Humidity: 5% to 95% non-condensing
  • Panel Material: 0.105″ thick stainless steel
  • Handset Cable Length: 34″ to 37″ (86cm to 94cm)
  • Audio Codecs: G711u, G711a, G722
  • Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
  • Connections: (1) RJ45 10/100 Base-T, (14) gel-filled butt connectors
  • CE
  • Canada ICES
  • FCC Part 15
  • SIP
NOTE: Viewing PDF documents requires the free Adobe® Reader® version 5.0 or greater.If you don't already have it installed, you will need to download and install it before using PDF documents.
Get Adobe Reader