Hubbell MTP 12 Fiber Cassette, ST-Style Connector |
| (Model # OCST) Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice. Optical cassettes are adapter panels installed with factory
terminated MTP multifiber fanouts. The cassettes can be
snapped into most Hubbell fiber patch panels, enclosures or
cabinets that accept FSP series adapter panels.
These cassettes provide significant installation labor savings because connector termination is not required in the field. The fanouts are housed in a durable metal cassette and, are terminated, at the rear, to a 12-fiber MTP ribbon connector. Factory assembled MTP to MTP ribbon cables are also available, with a pulling grip attached at one end, for easy pulls through conduit and innerduct.
Cassettes will not fit into the FTU2SP, FTU4SP or FCR350SP54R cabinets and enclosures.
Features:
- 100% optically tested for reliable performance
- Compact housings for space savings in patch panels
Specifications:
- Connector port at rear of cassette: 12-fiber MTP
- Dimensions: 5.1”H x 1.1”W x 2.75”D
- Cassette housing: epoxy powder paint 16 ga. CRS
- Multimode insertion loss: < 1.0 dB
- Singlemode insertion loss: < 0.75 dB
- Singlemode return loss: better than –50dB
- Minimum 62.5/125μm Fiber 850/1300nm bandwidth: 160/200 MHz-km
- Minimum 50/125μm Fiber 850/1300nm bandwidth: 500/500 MHz-km
- Minimum 50/125 laser optimized fiber effective mode
bandwidth: 2000 MHz-km at 850nm
- Operating/storage temp: 0ºC to 60ºC
- Maximum MTP cord pulling tension: 49.5 lbs
Applications Supported:
- Interconnections at ISP sites and computer centers
- Military installations requiring quick deployment
- Campus to campus broadband fiber LANS
- Factory process control installations
| |
|
Email Page
