Must Ship By Motor Freight! Panduit® T-70 Raceway Replacement Cover
Model # T70CIW8Raceway Covers to be used with T-70, TG-70 and Twin-70 bases. Read More
Must Ship By Motor Freight! Panduit® TG-70 Raceway Base and Cover
Model # TG70IWTG-70 raceway base in 40'/4pcs length. Supplied with pre-punched mounting holes....Read More
Panduit® TG-70 Raceway Divider Wall
Model # TGDWSnaps onto rails in TG raceway base to create separate channels. Must use with wire retainers to ensure channel separation per UL/CSA. Available in 8 or 10ft lengths. Gray only. Read More
Panduit® Reducer Fitting for LD Raceway
Model # RF5X3IW-EReducer Fitting for LD Raceway....Read More
Panduit® TG-70 Base Coupler Fitting
Model # TG70BCIW-XBase Coupler Fitting - Each piece includes 2 base coupler halves for joining sections of TG-70 base together....Read More
Panduit® TG End Cap Fitting
Model # TGECIWEnd Cap - Used to terminate or allow entry to TG raceway. Two knockouts each for ½" (16mm)and 1" (27mm) conduit. Read More
Panduit® TG Tee Divider Insert
Model # TGTDTG Tee Divider Insert - Mounts inside TGT tee fitting to maintain channel separation in TG raceway at tee junctions. Gray only....Read More
Panduit® TG Tee Fitting
Model # TGTIWTee Fitting - Used to join sections of TG raceway at tee junctions....Read More
Panduit® TG Inside Corner Fitting
Model # TGICIWInside Corner - Use to join sections of TG raceway at inside corners. Fittings adjust from 85° to 135° to adapt to non-square corners....Read More
Panduit® TG Outside Corner Fitting
Model # TGOCIWOutside Corner - Use to join sections of TG raceway at outside corners. Fittings adjust from 85° to 139° to adapt to non-square corners....Read More
Panduit® Cover Coupler Fitting (Pkg of 10)
Model # T70CCIW-XT-70, Twin-70, TE-70 and TG-70 Cover Coupler Fitting. 10 per package....Read More
Panduit® Wire Retainer
Model # TG70WR-XWire Retainers - Hold wires in place. Will not interfere with cover installation....Read More
Panduit® Device Bracket
Model # T70DB-XDevice Mounting Bracket - Used to mount NEMA standard single gang electrical outlets and communication devices with either screw-on or snap-on single gang faceplates. Can be used with T-70, Twin-70, TE-7...Read More
Panduit® TG-70 Three Sided Hanging Box
Model # TG70HB3-XThree sided Hanging Box - Mounts standard electrical outlets or communication devices with either NEMA standard single gang screw-on or PANDUIT Snap-On Faceplates. When used with TGDW divider wall, bo...Read More
Panduit® TG Snap-On Fiber Spool Bracket
Model # TGFSBFiber Spool Bracket - Each piece consists of two halves that snap onto base of TG Raceway. Provides method to contain one (1) meter or more of fiber slack and provides a strain relief. Provides 32mm ben...Read More
Panduit® TG Transmission Fitting
Model # TGTRIWTransition Fitting from TG to T-45 - Provides a tee transition from TG raceway to T-45 and LD series size 5 and 10. Use with RF5X3 reducer fitting to transiton to LD series size 3....Read More
Panduit® Magnet Strip
Model # FMS100X66 ft. roll x .100" wide for use with PD6, LDP5, LPD10, LD5, LD10 Raceways....Read More
Panduit® Surface Raceway Cutting Tool
Model # SRTPan-Way Surface Raceway Cutting Tool. Used to easily cut all sized of Types LDP, LD2P, LD, LDS, and PD raceway. Leaves a clean burr-free end on raceway. Can also be used to cut plastic conduit. Read More
