Chatsworth Products Universal Earthquake Bracing Kit
(Model # 10562-001)
Product Brochure (pdf)
Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice.
This adjustable wall/ceiling brace provides a means of securing an equipment rack or auxiliary frame to meet earthquake safety codes.
Features:
- Material is 2" x 1/4" steel finished with Gold Chem Film over zinc plating
- Kit consists of:
- 4 each brackets (make 2 swivel brackets)
- 2 each 1/2-13 x 1 1/4" hex bolts
- 2 each 1/2-13 hex nuts
- 2 each 1/2" split lock washers
Installation will require (not included):
- 1 each 5/8-11 threaded rod of appropriate length. (11440) Rod must be trimmed to proper length during installation
- 2 each 5/8-11 hex nuts (20142-111)
- 2 each 5/8 flat Type A washer, wide (04002-001 -or- 20283-022)
- Clip kit and hardware for attachment to channel or bar
Installation may also require (not included):
- For concrete ceiling:
- 1 each 5/8-11 concrete anchor (06001-001)
- 1 each 5/8-11 x 3" stud (08001-002)
- 2 each 5/8-11 hex nuts (20142-111)
- 1 each 5/8" split lock washer (04003-001)
- 1 each 5/8" flat, washer, wide, Type A (20283-022)
- For rack:
- 1 each 5/8-11 x 1 1/4" hex cap screw (02004-006)
- 1 each 5/8-11 hex nut (20142-111)
- 1 each 5/8" split lock washer (04003-001)
- For auxiliary frame or grid:
- 1 each Grid Clamp Kit (10609)
- 1 each 5/8-11 x 3 1/4" hex screw cap (02004-007)
- 1 each 5/8-11 hex nut (20142-111)
- 1 each 5/8" split lock washer (04003-001)
- For plywood backboard:
- 1 each 5/8" x 2” hex lag screw (02006-022)
- 1 each 5/8" split lock washer (04003-001)
Also Suggested
Open an Account
Similar Departments
NOTE: Viewing PDF documents requires the free Adobe® Reader® version 5.0 or greater.If you don't already have it installed, you will need to download and install it before using PDF documents.
