Aiphone Wire is an 18 gauge, 2 conductors, solid bare copper wire.
18 Gauge Wire Features:
- Conductor:
- Insulation:
- .011" foamed polyethylene insulation
- Assenbly:
- Jacket:
- .015" gray polyvinylchloride jacket
- Diameter: Nominal .152"
- Ripcord
- Electrical Characteristics:
- Capacitance: 11.05 pF/ft
- D.C. Resistance: 6.385 Ω per 1000 feet at 68°F
- Suggested working voltage: 300V
- UL, NEC, and UL compliant
- California state fire marshall approved
- Also identified as 87180210C and 87180250C
Installation Wire for Aiphone Intercom Systems
Aiphone wire is designed to provide the best quality performance for the intercom that is being installed. Wire is available in conductor counts ranging from 2 to 20 wires per cable, 22 or 18 gauge in most cases, and in lengths of 250', 500', and 1000'. The appropriate type of cable is available for every Aiphone system. See the following chart for a listing of Aiphone systems and the corresponding wire.
Wire Information:
All prices are subject to quarterly review and change by Aiphone
- Wire has been tested with its corresponding system to assure the best quality performance
- All wire is stranded unless otherwise indicated
- All wire has a Gray Jacket
- 250' lengths are on spools, 500' and 1000' lengths are in "Quick-Pull" boxes
- All wire meets the following standards: UL, C(UL), UL 444, CA Fire Marshal
- Aiphone wire is not CE rated.
Understanding Aiphone Wire Model Numbers:
*1: Two runs of 822202 is required for full system functionality
*2: Two runs 0f 812216 is required for full TD-24H/B functionality