Hobbes USA LANsmart Pro Multi Network Cable Tester

Features:

• Has an integrated Analog and Digital Tone Generator, Port Finder, and Quick Test
• Displays cable map results in a pin-to-pin format including split pairs
• All-in-one tester; wire map, twisted mapping, short location, quick test, cable length test, self-calibrating ability, analog and digital tone generator and port finder
• Incorporates TDR (Time Domain Reflect) technology
• Wire map for open, short, reversed, cross, split, miswire, and shield continuity
• Indicates the remote number of the remote identification unit for wire map test
• Incorporate Short Location function: locate short position, it determines if short is in the near or far end of the cable
• Measures twisted pairs of Cat5, Cat5E, and Cat6 length without remote
• Measures length of flat 2-pin, 4-pin and 6-pin telephone line
• Measures coax line length
• Self-calibrating ability for non-standard cables length display
• Incorporate Quick Test function: Memorize a cable's pin out as standard, and test mass cables
• Incorporates Port Finder function: locate corresponding socket on hub/switch
• Its Analog Tone Generator sends 1K Hz tone on all pins or selected single pin conductors
• Its Digital Tone Generator sends Single Tone and Double Tone
• LCD and "beep" indicator
• RJ45/ RJ11/ COAX port protection from telephone line damage
• Includes 4 remotes/ID function that test RJ11, RJ45 and coaxial cable
• Replaceable battery, with low battery indicator

Specifications:

• Display: 128*64 dot matrix LCD
• Connector type: RJ45/ RJ11/ COAX (main and remote)
• Accuracy:
• ± 2m < than 10m (± 6.56 Feet in < than 32.81 feet)
• ± 5% > 10m (32.81 feet)
• Test range for cable length: 0 - 300m (0 - 984 ft.)
• Split pairs detection: minimum 1.2m (3.94 ft.)
• Operating Temp: 0~50 degrees C
• Storage Temp: -30~50 degrees C
• Humidity: 10 to 90%
• Dimensions:
• Master- 80 x 33 x 120mm
• Remote- 44 x 28.5 x 42mm
• Power source: DC 6V; 4*AAA