Emitter with adhesive surface for easy installation on audio/video components. The IR Repeater System consists of three pieces: an IR Target (47621-CMS), IR Emitter (47621-MIE) and a distribution block (47603-110) for distributing control signals to multiple emitters. The IR Target takes the signal from a remote control for an audio/video component such as a DVD player or home theater receiver, and converts it to a low-voltage electrical signal for use over long distances and in different rooms. The electrical signal is converted back at the component to be controlled by the IR emitter. With such a set-up, a user can control a DVD player down in the family room from an upstairs bedroom, for example. The IR Repeater System is highly useful with multi-room audio/video distribution using the Component Modulator or Decora Media system. The IR Target easily installs in the ceiling or wall, and connects with Category 5 cable to the IR Emitter. A separate IR Emitter is used for each controlled A/V component, through the distribution block in the Structured Media Center. Distribution block with bracket (47689-B) available separately.