Aiphone 2 Conductor 18AWG Non-Shielded Wire
(Model # 871802)
Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice.
Aiphone Wire is an 18 gauge, 2 conductors, solid bare copper wire.
18 Gauge Wire Features:
- Conductor:
- 2 conductors
- 18 AWG
- Insulation:
- .011" foamed polyethylene insulation
- Assenbly:
- 3.00” pairs lay length
- Jacket:
- .015" gray polyvinylchloride jacket
- Diameter: Nominal .152"
- Ripcord
- Electrical Characteristics:
- Capacitance: 11.05 pF/ft
- D.C. Resistance: 6.385 Ω per 1000 feet at 68°F
- Suggested working voltage: 300V
- UL, NEC, and UL compliant
- California state fire marshall approved
- Also identified as 87180210C and 87180250C
Installation Wire for Aiphone Intercom Systems
Aiphone wire is designed to provide the best quality performance for the intercom that is being installed. Wire is available in conductor counts ranging from 2 to 20 wires per cable, 22 or 18 gauge in most cases, and in lengths of 250', 500', and 1000'. The appropriate type of cable is available for every Aiphone system. See the following chart for a listing of Aiphone systems and the corresponding wire.
Aiphone wire is designed to provide the best quality performance for the intercom that is being installed. Wire is available in conductor counts ranging from 2 to 20 wires per cable, 22 or 18 gauge in most cases, and in lengths of 250', 500', and 1000'. The appropriate type of cable is available for every Aiphone system. See the following chart for a listing of Aiphone systems and the corresponding wire.
Wire Information:
All prices are subject to quarterly review and change by Aiphone- Wire has been tested with its corresponding system to assure the best quality performance
- All wire is stranded unless otherwise indicated
- All wire has a Gray Jacket
- 250' lengths are on spools, 500' and 1000' lengths are in "Quick-Pull" boxes
- All wire meets the following standards: UL, C(UL), UL 444, CA Fire Marshal
- Aiphone wire is not CE rated.
Understanding Aiphone Wire Model Numbers:
-
Definition of each digit in the wire model number:
-
1st: All Aiphone wire begins with "8"
2nd: Type of cable: 2 = shielded, 3 = twisted pair, 4 = mid-capacitance, 5 = low-capacitance
3rd and 4th: Gauge of wire. (22=22AWG; 18=18AWG.)
5th and 6th digits: Number of conductors in the cable. (i.e. 02=2 conductors; 12=12 conductors.)
7th and 8th digits: Length of cable. (10 = 1000', 25 = 250', 50 = 500')
(Please note that all cables are not available in all lengths)
For example: Wire #82221550 is broken down as follows: ("8") = Aiphone cable; ("2") = shielded;
("22") = 22 AWG, ("15") = 15 conductors; ("50") = 500 foot "Quick-Pull" box.
*1: Two runs of 822202 is required for full system functionality
*2: Two runs 0f 812216 is required for full TD-24H/B functionality
| SKU | Length | Rated |
|---|---|---|
| 871802P10C | 1000' | Plenum |
| 87180250C | 500' | Non-Plenum |
| 87180210C | 1000' | Non-Plenum |
Also Suggested
Open an Account
Similar Departments
NOTE: Viewing PDF documents requires the free Adobe® Reader® version 5.0 or greater.If you don't already have it installed, you will need to download and install it before using PDF documents.
