PowerVerter APS Inverter/Charger is a standalone power source or an automotive inverter supplies up to 750 watts of continuous 120V AC power to 2 AC outlets from any 12V battery or automotive DC source.

Features:

• 750 watts continuous output power (while inverting); provides up to twice this rating for momentary startup of inductive loads. Provides 960 watts of power while passing through utility AC; the pass through power the APS750 can supply is limited by the facility/vehicle circuit board which the APS750 is connected to
• 2 outlets; 6 ft. AC power cord; DC input terminals for 12V battery connection
• Converts 12V DC to 120V AC
• Frequency control for operating stability
• Coated internal circuit boards offer continuous operation in humid environments (0-95%, non-condensing)
• Advanced 20 amp, 3-stage battery charger and selector switch for gel or wet cell batteries
• 6 diagnostic LEDs indicate AC present, on battery, charge rate, overload & battery voltage level (high, medium & low)
• Functions as an extended run UPS system, standalone power source and automotive inverter
• Battery runtime is dependent upon the size and number of user-supplied 12-volt batteries used
• Includes AC input cord and auto-transfer to enable battery charging and automatic UPS support for blackouts & brownouts
• RJ45 port allows connection of APS/PowerVerter Remote Switch (manuf# APSRM4)
• Switch allows user to select between off, auto-invert/remote and charge-only settings
• Configuration switches to allow the user to select the high and low voltage for the unit to automatically transfer from AC power to battery backup
• Resettable circuit breaker protects APS against system overload