Viking Advanced Clock Controlled Tone / Message Generator and Master Clock (Discontinued)

(Model # CTG-2)
Viking Advanced Clock Controlled Tone / Message Generator and Master Clock
Viking

Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice.

The CTG-2 is an advanced clock controlled tone/message generator designed to provide accurately timed tones and/or messages over your existing paging system. This provides a cost effective way of signaling school period changes, factory shifts, breaks, lunch periods, etc.

See Replacement Model # CTG-2A
CTG-2 Features:
  • Up to 14 Schedules and up to 1,000 Events
  • 6 minutes of CD quality WAV file record time
  • Up to 14 different tones or messages
  • 4 programmable trigger inputs for emergency tones, etc.
  • Automatic Day light savings time and leap year correction
  • Programmable Atomic Clock synchronization
  • USB PC programming software included
  • Non-volatile memory with 4 hour clock back up
  • Factory loaded with school & factory tones
  • Remote phone programming for on/off and schedule change
  • Page trigger outputs (12VDC and DPDT relay)
  • Programmable Auxiliary relay contacts (DPDT)
  • 24 hour digital clock displays hours & minutes
  • One mono line level pre-amp input and two audio outputs
  • Built-in 2 watt mono audio amplifier
  • Master volume control
  • Programmable volume control per tone/message
  • Time base selection: Atomic clock, 50/60Hz or internal
  • Programmable message repeat count for trigger inputs
  • RS485 clock SYNC terminals for future remote clock control
  • Internal Clock Backup Time: 4 hours
  • Power: 120V AC/13.8V AC 1.25A UL listed adapter provided, max current draw: 650mA
  • Dimensions: 210mm x 159mm x 45mm (8.25” x 6.25” x 1.75”)
  • Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-condensing humidity
  • Preamp (Audio 1/2) Output: 6V RMS across 600 ohms
  • Paging Amplifier Output: 2 watts - powers up to (3) 8 ohm or (16) 45 ohm speakers Sound Pressure: 100 dB @ 1 meter (loud electronic warble from 25AE paging horn)
  • REN: 0.0 B
  • Maximum Speaker Output Wire Run: 91m (300 ft), 18 AWG
  • Maximum Load on Page Trigger Output: 1K ohm
  • WAV File Resolution: 16 bit or 8 bit
  • WAV File Sampling Rate: 44.1K, 22K or 11K
  • Time Base: 50/60 Hz or internal with atomic clock sync Internal Time Base Accuracy: +/- 2ppm (63 seconds per year) without Atomic Clock Sync or manual adjustment
  • Connections: 31 screw terminal block positions, (1) type B USB jack
NOTE: Viewing PDF documents requires the free Adobe® Reader® version 5.0 or greater.If you don't already have it installed, you will need to download and install it before using PDF documents.
Get Adobe Reader