Legrand - Cablofil 1/2" VELCRO On A Roll (180")(Model # EZVC)
Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice.
- 1/2" VELCRO brand touch fastener on a 180" roll
- Cut to fit any size cable bundle
- Great for frequent cable changes
Returns and Cancellations:
- Due to manufacturer requirements, this product is not returnable and cannot be canceled once ordered.
VELCRO is a registered trademark of Velcro Industries B.V.
Each of these accessories will enhance your CablofilŽ installation. They are designed to maximize performance with a minimum installation time. For example, CablofilŽ's award winning FAS Roller, is the perfect answer to problems with pulling cables. When planning your next project, look through all CablofilŽ accessories to make the most out of your installation.
FASROLLER - Four roller bracket used to prevent cable snags when pulling cable around corners and in hard to reach places. Use FAS Roller as a permanent part of a tray installation in horizontal and vertical pathways - for hard to reach areas,such as access floors or plenums.
- Unique 4 roller design prevents cable snagging
- Easy open gate allows full access to FAS roller
- Bi-color rollers show roller turn at a distance which prevents burning the cable while being pulled
- Multifix poly swivel base attaches directly to EZ Tray without tools
- Can also be attached with bolts or handy clamp provided in kit
- Use FAS Roller as a permanent part of a tray installation in horizontal and vertical pathways - for hard to reach areas, i.e., access floors or plenums
- Sold only in sets of 6 each - includes handy carrying case
Cable Drop Out
DROPOUT - Protects cables when exiting and entering tray. Helps maintain a "neat and workman like" appearance.
- Attach to tray with EZ BN 1-4 and CE 25 (sold separately)
- Slotted design allows for cable tie or touch fastener tiewrap cable attachment
- Corrosion resistant pre-galvanized finish
- 7" Radius bend eases strain on cables
- Helps maintain a "neat and workman like" appearance
CABLEXIT - Protects cable when exiting and entering tray. Can be used as a radius limiter on tees, crosses and elbows.
- Attach to tray with built in tabs or use a bolt connection (CE40 / EZBN14)
- Corrosion resistant galvanized finish
- 2" radius eases strain on cables
- Can be used as a radius limiter on tees, crosses and elbows
EZJB5-16 - Use with a FASP200 or FASP300 for attachment to and stabilization of a 19" or 23" relay rack
- No drilling needed
- Zinc plated finish
- 2 per package
MFM - Allows installer to mount junction boxes, lighting or other hardware directly to EZ Tray.
- Can be used to assist in cable management around horizontal and vertical transitions
- Snap in mounting tabs eliminates the need for additional hardware and speeds install time
Note: Available in 2 sizes:
Click here for MFM Mounting Plate specifications PDF
SBDA Diversion Box Support
SBDA - Diversion Box Support
- Allows for installation of electrical boxes directly to EZ Tray
- Bend over tabs require no additional hardware for installation
COT - For wire separation within a single cable tray.
- Available in 2" and 4" heights
- Requires EZ BN 1/4" and CE 25 to attach to EZ Tray(sold separately)
- Field fabricate with tin snips for vertical and horizontal transitions
Cable Label Clip
EZCLP - Use cable label clips to identify cable runs. Package of 50 labels.
- Color code makes easy identification easy
- Durable poly material wont fade
CVN - Field fabricated to fit changes in levels.
- Color eliminates dirt and dust build-up on cable
- Built-in tabs attach cover to tray without bolts
Seismic Cable Kit
SZMC - For Seismic bracing of EZ Tray to concrete deck
- Each kit contains:
- (4) 10' cables with mounting eyelets
- (2) Metal brackets for attachment to support members
- (4) Cables clamp collars
- (4) Concrete bolts
- All necessary hardware
- Cable cutter (left) and swager (right) are available separately
- Consult local codes for proper installation intervals
VELCROŽ on a Roll
EZVC - VELCROŽ brand touch fastener On A Roll
- 1/2" VELCROŽ brand touch fastener can be cut to fit any size cable bundle
- Great for frequent cable changes
VELCROŽ is a registered trademark of Velcro Industries B.V.
COUPFIL - Bolt Cutter
- Offset cutter head gives a quick, perfect cut
- Rubber handle makes for a comfortable grip
|EZVC||Cannot be canceled once product is ordered||No|