Hubbell Watertight IEC Pin and Sleeve Receptacle, 2P3W, 20A 125V
(Model # HBL320R4W)
Product Brochure (pdf)
Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice.
Watertight IEC Pin and Sleeve Receptacle, 2P3W, 20A 125V.
Receptacle Features:
- IEC Product Type: Watertight
- Service Style: Standard
- Device: Receptacle
- Amperage: 20A
- Voltage: 125V
- Poles and Wires: 2 Pole, 3 Wire
- Terminal Accommodations: #14 To #10 AWG copper wire only
- Housing: Zytel 101 Nylon
- Mounting Flange: Zytel 101 Nylon
- Mounting Screws: Stainless Steel (300 Series)
- Contact Carrier: High-Impact Thermoset
- Retainer: High-Impact Thermoset
- Terminal Screws: Stainless Steel (300 series)
- Assembly Screws: Stainless Steel (300 series)
- Gaskets: Solid Neoprene
- Cover Arm: Rynite SST35
- Arm Spring: Stainless Steel (17-1 Type)
- Cover: Rynite SST35
- Cover Screw/Rivet: Nickel Plated Brass
- Rotating Sealing Disc: Polycarbonate
- Ground/Phase Sleeve: Brass
- Pin/Sleeve Spring: Stainless Steel (300 Series)
- Dielectric Withstand Voltage: Withstands 3,000V AC Minimum
- Maximum Working Voltage: 600V RMS (i.e.minimum creepage distance 10 mm minimum)
- Current Interrupting: Certified for current interrupting at full rated current
- Every Hubbell non-metallic Pin and Sleeve product is designed to meet the International Standard IEC 60309-1 and IEC 60309-2. This device standard calls out singly rated, non-interchangeable configuration for every voltage and type of service
Also Suggested
Open an Account
Similar Departments
NOTE: Viewing PDF documents requires the free Adobe® Reader® version 5.0 or greater.If you don't already have it installed, you will need to download and install it before using PDF documents.
