Hubbell Flush Fire Rated Poke-Through (Discontinued) |
(Model # HPWPT7FSLA)  Discontinued, Without Direct Replacement Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice. Hubbell Flush Fire Rated Poke-Through provides integral, 20A/125V, pre-wired StyleLine receptacle and the cover (sold separately) includes two 110, Cat 5 jacks. This combination provides both power and voice/data connections from one poke-through to the workstation. Greater flexibility and capacity can be achieved by replacing the receptacle with 4-port, Cat 5e jack array (SL5E4) resulting in 4 Cat 5e jacks assembled to one unit.
Features:
- Populates up to 4 Category 5e jacks (SL5E4)
- Pre-wired 20A/125V StyleLine receptacle is included with the poke-through fitting
- Jacks mount flush
- Core hole diameter size: 3" (76.2mm)
- Accommodates floor thickness of 2.25" - 7"
- For use in 1, 1.5, 2, 3, or 4-hour rated unprotected, reinforced concrete floors with a minimum of 2 feet O.C. and not more than one unit per 65 sq. ft. of floor area in each span
- Conduit tubes power 0.75" EMT, low-voltage, 0.5" EMT (two)
- Junction box 13.0 cubic inches; eight 0.75" knockouts
- Material - Device Cover and Flaps: thermoplastic; carpet flanges: brass
Cover sold separately (HPWFRFSLA) | |
|
Email Page
