Leviton Passive Infrared Occupancy Sensor, Black

(Model # OSSNL-IFE)
Leviton Passive Infrared Occupancy Sensor, Black

Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice.

  • $66.51

  • Availability:
  • Usually ships in 1 week
Leviton OSSNL-IFE Passive Infrared Occupancy Sensor, Black. OSSNL-IFE detects motion from a heat-emitting source within its field-of-view to automatically switch lights ON and OFF.
OSSNL-IFE Sensor Features
  • Fits in standard wallbox and replaces single-pole wall switch; ground and neutral connection required
  • Gangable with other units
  • 180° field-of-view provides approximately 195m2 of coverage
  • Convenient pushbutton provides manual ON/OFF light switching at any time
  • Two dual element PIR sensors used to widen detection range
  • Segmented Fresnel lens provides optimum sensitivity and performance and detects even the slightest body movements
  • Vandal resistant PIR lens
  • Adjustable arc between 180° and 60°
  • Red LED indicator light flashes when sensor detects motion to verify detection is active
  • Customizable Time Delay adjustment for delayed-OFF time settings of 30 seconds (for walking test), 10 minutes, 20 minutes, and 30  minutes
  • Light Sensor Adjustable Ambient Light Override ranges from approximately 2 foot-candles (20 lux) to 500+ foot-candles (5000+ lux) to prevent lights from turning ON automatically during periods of ample natural light, increasing energy savings
  • Light sensor enables the load hold-OFF feature once level has been set
  • Vacancy confirmation - when the time out expires and the relays turn OFF, a 30 second vacancy confirmation exists to turn the relays back ON
  • False detection circuitry
  • Presentation Mode feature for slide or film presenta-tions allows push buttons to turn lights OFF and keep them OFF while the room is occupied
  • LED NightLight offers “Guide Light” functionality
  • Adjustable NightLight illumination setting for continuous or dimmed NightLight
  • One unit can be used for 120, 208, 220, 230, 240 VAC lighting. Compatible with both electronic and magnetic ballasts
  • Exclusive Levition H.I.S. Circuitry
Available Colors:
Light Almond
NOTE: Viewing PDF documents requires the free Adobe® Reader® version 5.0 or greater.If you don't already have it installed, you will need to download and install it before using PDF documents.
Get Adobe Reader