Tripp Lite Smart Online Expandable 2200VA 2U Rack / Tower UPS System

Features:

• Smart Online high performance UPS system is ideal for critical voice, data, medical and industrial network applications
• True on-line, double-conversion UPS provides perfectly regulated sine wave output within 2% of 100/110/120V (user selectable) under all usage conditions
• Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
• Removes harmonic distortion, fast electrical impulses, frequency variations and other hard to solve power problems not addressed by other UPS types
• Corrects line voltage conditions as low as 65V and as high as 138V back to selectable 100/110/120V (+/-2%) values
• Standard internal battery set offers 18 minutes runtime at half load (800W) and 6 minutes at full load (1600W)
• Optional BP48V24-2U external battery pack increases runtime to 66 minutes at half load (800W) and 28 minutes at full load (1600W /limit 1)
• Optional BP48V60RT3U external battery pack increases runtime to 132 minutes at half load (800W) and 61 minutes at full load (1600W / multi-pack compatible)
• Compact rackmount form factor installs using only 2 rack spaces (2U) with a maximum installed depth of only 19 inches
• Ships with all mounting accessories for 4 post rackmount installation
• Optional 2POSTRMKITWM enables 2 post rackmount or wallmount installation
• Optional 2-9USTAND accessory enables small-footprint upright tower placement
• Fault tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS suffers internal failure and requires maintenance
• Network interfaces support simultaneous communications via built-in USB, DB9 serial and SNMPWEBCARD slot
• HID compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows, Mac OS X and Linux
• Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
• UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter sutoff, activate self-test, load bank output power control and remote reboot, UPS nominal voltage adjustment and UPS line to battery power voltage setpoints
• Built-in Emergency Power Off (EPO) interface with cable
• NEMA 5-20P input plug (user-installable NEMA 5-15P replacement plug included) / NEMA 5-15/20R & NEMA L5-20R output receptacles
• Integrated 2 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual load banks (bank 1 has two outlets / bank two has four outlets)
• Front panel LEDs offer current monitoring and battery charge level information
• UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user required
• Single line TEL/DSL or network ethernet line surge suppression