APC Smart-UPS RT 3000VA 208V w/ 208V to 120V Step-Down Transformer is a high-density, performance UPS for voice and data networks, medical labs, and light industrial applications.

Step-Down Transformer Features:

• Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS overload condition or fault
• Scalable runtime: Allows additional run time to be quickly added as needed
• Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging
• Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
• Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power
• Network manageable: Provides remote management of the UPS over the network.
• InfraStruXure Manager Compatible: Enables centralized management via the APC InfraStruXure Manager
• SmartSlot: Customize UPS capabilities with management cards
• LED status indicators: Quickly understand unit and power status with visual indicators
• Serial Connectivity: Provides management of the UPS via a serial port
• Plug-and-Play external batteries: Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS
• Rack/Tower convertible: Protects the initial investment in the UPS when migrating from tower to rack-mount environment
• Flash upgradeable firmware: Install maintenance releases of firmware remotely using FTP
• User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
• Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced
• Predicitive failure notification: Provides early-warning fault analysis ensuring proactive component replacement
• Disconnected battery notification: Warns when a battery is not available to provide backup power
• Audible alarms: Provides notification of changing utility power and UPS conditions
• Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery
• Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances
• Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling

Technical Specifications

• Output Power Capacity: 2100 Watts / 3000 VA
• Max Configurable Power: 2100 Watts / 3000 VA
• Nominal Output Voltage: 120V,208V
• Output Voltage Note: Configurable for 208 or 240 nominal output voltage
• Efficiency at Full Load: 92%
• Output Voltage Distortion: Less than 3%
• Output Frequency (sync to mains): 50/60 Hz +/- 3 Hz user adjustable +/- 0.1
• Crest Factor: 3 : 1
• Waveform Type: Sine wave
• Output Connections:
• (8) NEMA 5-20R
• (1) NEMA L14-30R
• (4) NEMA L6-20R
• (2) NEMA L6-30R
• Nominal Input Voltage: 208V
• Input Frequency: 50/60 Hz +/- 5 Hz (auto sensing)
• Input Connections: NEMA L6-30P
• Cord Length: 10'
• Input voltage range for main operations: 160 - 280V
• Input voltage adjustable range for mains operation: 100 - 280V
• Other Input Voltages: 240
• Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Included Battery Modules: 2
• Typical recharge time: 2.50 hour(s)
• Replacement Battery: RBC44
• Interface Port(s): RJ-45 Serial,SmartSlot
• Surge energy rating: 480 Joules
• Dimensions: 17" H x 10.2" W x 26" D
• Package Contains:
• (1) Transformer
• (1) CD with software
• (1) Smart UPS signalling RS-232 cable
• (1) User Manual