Bogen Phone Access Module (Discontinued) |
(Model # TAMB)  Discontinued, Replaced by Model # TAMB2 Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice. Bogen Phone Access Module is a unique, dual-purpose voice paging adapter designed as an interface from a telephone system to a paging system. Any of 3 types of analog ports can be connected using the Telephone Access Module: loop start trunk, ground start trunk or station port (90V ring up).
Features:
- Loop start, ground start and station port(90V ring up) compatibility
- 600-ohm output
- Pre-announce and confirmation tones (defeatable)
- Adjustable tone volume
- Works with one-way and two-way (talkback) zones
- Background music input with volume control
- Suppresses background music during paging
- Station access disconnect is dynamically controlled using a combination of disconnect timer, silence interval timer, and Calling Party Control (CPC) signal detection
- Disconnect VOX timer is adjustable from 2 to 6
seconds of silence
- Calling Party Control (CPC) signal from switch immediately disconnects station port
- 24V or 48V operation (trunk port mode)
- 1 normally open contact pair available for operating external equipment
- Easily accessible controls and switches
- No power supply necessary when connected to a PABX station port or Centrex line
- Punch-block connections (type 66)
- Wall mount design
- FCC Part 68 approved
- Paging Frequency Response: 200 – 8000 Hz, ±1 dB
- Input/Output Impedance: 600-ohms, nominal
- Default Disconnect Timer: 6 to 35 seconds, adjustable
| |
|
Email Page
