Sparky Plus USB Recorder by Digitalks

Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice.

Sparky Plus USB Voice Recorder adds a second record path that records the handset microphone signal for the local caller. This path has an adjustable record volume control so that the local caller and remote caller can be recorded at the same level. The volume control is located in the user interface under the device control tab (see picture below), and is called Sparky + Gain. Note that the gain control only appears for Sparky +. The default value for Sparky + gain is 0; and it can be adjusted anywhere between 0 and 255. It should only be adjusted if the low side tone problem exists as described above. Once set to a satisfactory level, there should be no need to re-adjust it because the system will remember and recall the setting every time the recorder interface is started.
Click here to download the current software release.

Features:

Sparky+ uses version 2.07 or higher of the USB Recorder software:

Version 2.07 of the USB recorder software, there is also an adjustable playback level control in the upper right corner of the GUI. This allows for a + or - 20 db of playback level adjustment

If recording from one line or 10,000 lines the USB Recorder is the solution
Learn, change, improve by listening to your recordings
Real proof at your fingertips
No tapes, no batteries, maintenance free
Built in mic for room recording
Connects to the handset and works with all corded phones - no license needed
Not compatible with MAC

Product Description

Digitalks Sparky Plus USB Recorder

Features:

Installs in 2 minutes and you're ready to record!