Valcom Master GPS Receiver for Valcom Clock Systems

(Model # V-GPSA)
Valcom Master GPS Receiver for Valcom Clock Systems

Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice.

  • $3,408.19

  • Availability:
  • Usually ships in 3 weeks
  • Wireless
Master GPS Receiver for Valcom Clock Systems.
  • Eight channel technology
  • Microprocessor based
  • Immediate start up time
  • High reliability
  • In case of loss of signal, a temperature controlled time base is implemented allowing calibration of the time during variants in temperature
  • Operation of auxiliary circuit for once-a-day relay closure with precise second resolution
  • Synchronized to UTC within 500 nanoseconds
  • Interfaces directly with Valcom analog and digital clock systems
  • Capable of working as a master for Valcom 2-wire digital systems
  • Field programmable via two switches
  • Two levels of programming for technicians and end users
  • Ten year battery backup for timekeeping
  • One programmable signal duration per circuit (1 - 99 seconds), allowing the user to interface with other systems
  • Diagnostic mode allows user to maintain and troubleshoot clock system from the master clock
  • LED display
  • Valcom digital inputs and outputs
  • Rack mountable
  • FCC approved
Note: When used with Valcom wireless clocks, add Wireless Master Clock Repeater (V-WMCRA). When used with Valcom wired clocks (2-wire correction), add 6-Amp, 2-Wire Clock Drivers (V-VCU) as necessary.
SKU Wireless
NOTE: Viewing PDF documents requires the free Adobe® Reader® version 5.0 or greater.If you don't already have it installed, you will need to download and install it before using PDF documents.
Get Adobe Reader