Valcom Network Station Port - Unmanaged (Discontinued)

(Model # VIP-810)
Valcom Network Station Port - Unmanaged
Valcom
Discontinued, Without Direct Replacement

Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice.

Network Station Port connects to a FXO port, loop start trunk port or dedicated analog telephone terminal devices and is connected to an IP-based LAN/WAN. Operates with both single line telephones and/or PagePac Station DoorPhone and can be used for handset paging control. Phones within the network can dial each other and intercom calls can be routed to a specific telephone for assistance. Paging handset can access any zone in the system and ALL CALL is provided.
Station Port Features:
  • No server required
  • Recognition of DTMF tones
  • Generation of DTMF tones
  • Two digit dial plan
  • No dial/auto destination
  • Easy windows based setup
  • Paging access
  • Allows analog headsets to access paging via LAN/WAN
  • VoIP remote handset paging system access to networked VIP-800 audio adapters
  • Point to point or multi-point communication to other telephones and PagePac station doorphone call in stations
  • Ringdown circuit
  • Information phones - using ringdown with 2500 set
  • Analog device line interface-
  • Connects to FXO, Analog telephone set or Loop Start Trunk Port
  • Max 3 Ringer Equivalents (3 REN)
  • Loop Current: 40 Ma Max
  • Control Unit Power Requirements: +0 Valcom Power Units

VIP-810 Networked Station Port

The VIP-810 Station Port operates with both single line telephones and/or PagePac Station DoorPhone and can be used for handset paging control. Phones within the network can dial each other and intercom calls can be routed to a specific telephone for assistance. Paging handset can access any zone in the system and ALL CALL is provided.

  • VoIP remote handset paging system(s) access to networked VIP-800 audio adapters
  • Point to point or multi-point communication to other telephones and PagePac Station
  • Point to Point or Multi-Point communication to other telephones and PagePac Station DoorPhone call in stations
  • Ringdown circuit
  • Information phones - using ringdown with 2500 set
Features:
  • No server required
  • Recognition of DTMF tones
  • Generation of DTMF tones
  • Two digit dial plan
  • No dial/auto destination
  • Easy windows based setup
  • Paging access
  • Allows analog headsets to access paging via LAN/WAN
Specifications:
  • Protocols -
    • UDP/IP, IGMP, v1, ARP
  • Voice Algorithm -
    • G.711 (64kbits/s)(ulaw)
    • Echo suppression by means of DSP
  • Electrical Properties -
    • Voltage: 24 Vdc
    • Current: 250 mA
  • Regulatory -
    • FCC Part 15, Class A
Input:
  • Analog Device Line Interface -
    • Connects to FXO, analog telephone set or loop start trunk port
    • Max 3 ringer equivalents (3 REN)
    • Loop current: 40 Ma Max
Click here to view Valcom's VIP-810 Networked Station Port PDF.




VoIP Intercom and Loudspeaker Paging over LAN/WAN

  • Using VIP-810 Station port with single line telephone to provide Call In Intercom, handset communications and paging control
  • Using VIP-800 Audio Page Adapters to interface to Valcom self-amplified paging loudspeakers

Overview:
The VIP-810 is used with single line telephones to receive calls from intercom stations and to access any paging point in the network. The VIP-800 and VIP-810 simply plug into the nearest LAN/WAN location, providing the communications signal path connecting local area speakers, station handsets and paging control station. One Way All Call paging or specific zone pages are supported. Full Two Way intercom communications is provided between all stations and central security phone.

VoIP Intercom and Communications Key Uses and Benefits:

  • Install intercom stations and handsets using your LAN/WAN for communications
  • NO PSTN leased line charges!
  • Receive calls from remote stations and handsets
  • Call any VIP-810 and connect with intercom
  • All Call and zoned paging loudspeaker selection

System Design Notes:

  • 1. VIP-810 connected to single line telephone (SLT) providing handset and 2-way intercom with remote stations.
  • 2. VIP-810 connected to PagePac Station Doorphone providing call in to security phone and full 2-way intercom.
  • 3. VIP-810 connected to 2500 SLT (no dial pad) providing ringdown call in and full intercom capability
  • 4. VIP-800 connected to a zone of V-9010-W, Vandal Resistant, 1-way paging speakers and VP-6124 power supply.
  • 5. VIP-810 connected to PagePac Station Doorphone providing call in to security phone and full 2-way intercom.
Click here to view Valcom's VoIP Intercom and Loudspeaker Paging over LAN/WAN PDF.



IP Telephone Trunk Enabled Intercom and Paging System

  • Using VIP-810 Station Port with IP based FXO or Analog Loop Start Trunk to provide intercom and paging access to remote locations
  • Using VIP-800 Audio Page Port to provide paging signal distribution over the LAN/WAN to remote buildings/areas
  • Using VIP-810 with Intercom Call In PagePac Station DoorPhones

Overview:
The Valcom VIP-810 is used to interface IP Based phone system Trunk Ports to overhead loudspeaker paging speakers and intercom stations. When connected to an IP Based analog Trunk position, the VIP-810 provides zone paging control, intercom communications and audio signal routing of overhead voice pages. The communications signal is then transported over the network and received by other VIP-800 and VIP-810s in remote areas. Valcom VoIP adapters plug into the nearest LAN/WAN port in any location, providing the communications path to speakers and intercom stations. User can access overhead paging from any IP phone and send voice pages to individual zones, groups or facility wide ALL CALL. Intercom station call is facilitated through trunk programming, 2-way communications with station is provided.

VoIP Phone Intercom and Loudspeaker Paging Key Benefits:

  • Installs overhead paging and intercom using LAN/WAN
  • IP integration thru analog trunk port provides intercom and paging operation from any IP telephone set
  • Network ALL your buildings for paging and intercom without leased line PSTN charges!

System Design Notes:

  • 1. Gateway FXO or Loop Start Trunk connected to VIP-810, providing IP telephone paging and intercom access.
  • 2. VIP-810 connected to IP Gateway FXO Trunk providing IP telephone handset 1-way paging and 2-way intercom.
  • 3. VIP-810 connected to PagePac Station Doorphone providing call in to security phone and full 2-way intercom.
  • 4. VIP-800 connected to a zone of V-1080 Flexhorn Vandal Proof paging loudspeakers using VP-6124 power supply.
  • 5. VIP-800 provides audio output and contact closure. Connection to remote amplifier may vary by manufacture and require additional components.

Click here to view Valcom's IP Telephone Trunk Enabled Intercom and Paging System PDF.



PBX Trunk Access VoIP Intercom and Paging System
  • Using VIP-810 Station Port with PBX FXO or Analog Loop Start Trunk to provide intercom and paging access to remote locations
  • Using VIP-800 Audio Page Port to provide paging signal distribution over the LAN/WAN to remote buildings/areas
  • Using VIP-810 with Intercom Call In Station DoorPhones

Overview:
The Valcom VIP-810 is used to interface PBX phone system Trunk Ports to overhead loudspeaker paging speakers and intercom stations. When connected to a PBX analog Trunk position, the VIP-810 provides zone paging control, intercom communications and audio signal routing of overhead voice pages. The communications signal is then transported over the network and received by other VIP-810s and VIP-800s in remote areas. Valcom VoIP adapters plug into the nearest LAN/WAN port in any location, providing the communications path to speakers and intercom stations. User can access overhead paging from any PBX key telephone set(s) and send voice pages to individual zones, groups or facility wide ALL CALL. Intercom station call in is facilitated through trunk programming, 2-way communications with station is provided.

VoIP PBX Trunk Level Access Intercom and Loudspeaker Paging Key Benefits:

  • Communicate with handsets, intercom stations and loudspeakers
  • Receive calls to attendant position from anywhere on the network
  • All Call and zoned paging operation from any PBX phone
  • PBX Trunk Level Access VoIP Integration provides 2 way intercom
  • Operation and one-way paging
  • Network ALL your buildings for paging and intercom without extra leased line charges!

System Design Notes:

  • 1. PBX/FXO or Loop Start Trunk connected to VIP-810, providing IP telephone paging and intercom access.
  • 2. VIP-810 connected to PBX/FXO Trunk providing PBX key telephone handset 1-way paging and 2-way Intercom.
  • 3. VIP-800 connected to a zone of V-1013B Track-style paging loudspeakers using VP-6124 power supply.
  • VIP-810 connected to PagePac Station Doorphone providing call in to security phone and full 2-way intercom.
  • VIP-800 provides audio output and contact closure. Connection to remote amplifier may vary by manufacture and require additional components.

Click here to view Valcom's PBX Trunk Access VoIP Intercom and Paging System PDF.



Emergency Back-Up Telephone Communications System

  • Using VIP-810 Station Port with single line telephones to provide telephone communications and loudspeaker paging control
  • Using VIP-800 Audio Page Port to interface with Valcom speakers to provide facility loudspeaker paging

Overview:
Valcom VoIP products provide LAN/WAN connectivity for loudspeaker paging and telephone communications. Use VoIP telephones as a back-up to regular phone service incase phone communications from private utilities is out of service. The VIP-810 is used with single line telephones to make and receive calls within the LAN/WAN. It can dial any VIP-800 paging point(s) in the network for all call or specific group or zone loudspeaker paging. Provides redundant path of communications using your LAN/WAN during natural disaster and national emergencies.

VoIP Emergency Back-up Telephone Communications System Key Benefits:

  • Install totally redundant communications system over LAN/WAN in case of emergency situations
  • Works with any Analog Single line telephone instrument
  • Selectively call and communicate with any other phone on the network
  • Receive calls from any phone on the network
  • Network ALL your buildings for internal security communications without paying PSTN leased line charges!

System Design Notes:

  • 1. VIP-810 connected to single line telephone (SLT) providing handset paging and 2-way telecom with remote stations.
  • 2. VIP-800 connected to zone of V-1080 Flexhorn paging speakers and V-9805 Vandal Baffle and VP-6124 power supply.
  • 3. VIP-810 connected to industrial grade phone (SLT) providing handset paging and 2-way telecom with remote stations.
  • 4. VIP-810 connected to SLT providing intercom capability with other handsets, Doorphone intercom stations and full handset loudspeaker paging functionality.

Click here to view Valcom's Emergency Back-Up Telephone Communications System PDF.


NOTE: Viewing PDF documents requires the free Adobe® Reader® version 5.0 or greater.If you don't already have it installed, you will need to download and install it before using PDF documents.
Get Adobe Reader