Bogen Matching Transformer with Speaker Level Signal Adaptation

(Model # WMT1AS)
Bogen Matching Transformer with Speaker Level Signal Adaptation

Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice.

  • $61.48

  • Availability:
  • In Stock
  • Manufacturer
  • 2 Year Warranty
Matching Transformer with Speaker Level Signal Adaptation is a general-purpose matching transformer that allows proper connections between high (10k-ohm) and low (600-ohm) inputs and outputs. This transformer can be used to balance an unbalanced line or provide isolation between two pieces or equipment. Model WMT1AS can adapt speaker level signals (25V/70V systems) to a level suitable for the AUX input of an amplifier.
WMT1AS Features:
  • Hi-Z, 10k-ohm primary impedance
  • Lo-Z, 600-ohm secondary impedance, balanced with center tap
  • Matches high-to-low impedance or low-to-high impedance
  • Adapts line level signals to microphone inputs
  • RCA connector for Hi-Z side
  • Screw terminals for Lo-Z side
  • Small steel enclosure with mounting ears allows easy mounting any place
  • No wiring or soldering required
  • May be used to provide a 600-ohm output from a Bogen mixer/pre-amplifier
  • Frequency Response: 50 Hz to 20 kHz
  • Dimensions: 2" W x 2-3/8" H x 1-1/4" D
NOTE: Viewing PDF documents requires the free Adobe® Reader® version 5.0 or greater.If you don't already have it installed, you will need to download and install it before using PDF documents.
Get Adobe Reader