|
| 21. | 
Model # KP70D-B8D | | Provides 8 (1B+D) digital station (DLI) ports. KDb station expansion cards cannot be used with this card. Read More
|
$172.97
|  Detail Box
In Stock |
|
| 22. |
Model # KP24D-BEM | | Provides two two wire (TL11M) tie line interfaces and four 1B+D DLI ports. KDb’s cannot be used with this card. Used on the iDCS 100 and DCS Compact systems. Read More
|
$176.97
| Detail Box
Usually ships in 10 days |
|
| 23. |
Model # KP100DBPS | | Replacement power supply for main system cabinet. Works with Officeserv 100 Read More
|
$199.97
| Detail Box
In Stock |
|
| 24. |
Model # DCSC-2X4-SLI | | Analog Expansion Card provides two Caller ID-compatible loop start C.O. interfaces, four SLI ports for industry standard single line telephones and the ability to provide a loop disconnect signal. Doe...Read More
|
$209.97
| Detail Box
In Stock |
|
| 25. |
Model # TRKC1 | | Samsung DCS Trunk C1 expansion card provides 8 incoming telephone lines with CO Disconnect Detection and Caller ID for DCS Systems. Read More
|
$248.97
ON SALE NOW!
| Detail Box
Regular Price: $289.00
You Save: $40.03 (14%)
In Stock |
|
| 26. |
Model # KP70D-BPL | | Daughter board required to provide clocking for the S4BRI card and/or a TE/PRI card. If an S4BRI or TE/PRI card is to be installed an SPLL daughter board must also be
installed. Only one SPLL daughte...Read More
|
$283.47
| Detail Box
In Stock |
|
| 27. |
Model # KP70D-BMI1 | | Provides a second MOH/BGM input, 3 general purpose relays, an alarm sensor, 2 serial I/O ports, caller ID decoding circuits and 4 DSP circuits. May be required for DID/ANI/DNIS. Recommended for where heav...Read More
|
$329.97
| Detail Box
In Stock |
|
| 28. |
Model # KP70D-B8S | | Read More
|
$329.97
| Detail Box
In Stock |
|
| 29. | 
Model # PSU-B | | Power Supply for the Samsung iDCS500-OfficeServ 500 telephone systems. Supports up to 56 stations. Read More
|
$399.97
| Detail Box
In Stock |
|
| 30. |
Model # KP70D-BMI2 | | Provides a second MOH/BGM input, three general purpose relays, an alarm sensor, two serial I/O ports, caller ID decoding circuits, and four DSP circuits. May be required for DID/ANI/DNIS. It is recommende...Read More
|
$599.97
| Detail Box
In Stock |
|
| 31. |
Model # KP500DBTEP | | TEPRI iDCS 500 T1/E1/PRI Card. Installs in slots 1,2 or 3 of any iDCS 500 Cabinet. Read More
|
$1,004.97
| Detail Box
In Stock |
|
| 32. |
Model # KP100DBIT3 | | Read More
|
$2,598.97
| Detail Box
Usually ships in 10 days |
|
Email Page
