Panduit® FiberRunner Routing System
Panduit® Adjustable Ladder QuikLock™ Bracket for 6x4 and 4x4 Systems
Model # FR6ALBUsed to support the 6x4 and 4x4 systems attaching to any 3/8" (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder rack rail....Read More
Panduit® 12x4 Horizontal Right Angle Fitting
Model # FRRA12X412x4 Horizontal right angle fitting attaches to 12x4 channel and/or fitting to create a 90° horizontal turn from a straight horizontal run. Inside divider walls manage cables routed around horizontal righ...Read More
Panduit® 6" NetRunner Vertical Assembly
Model # NRV6High capacity front and rear vertical manager. Large finger openings accommodate up to 24 Category 6A cables....Read More
Panduit® End Cap Fitting
Model # FEC2X2YLFiber-Duct system fitting used for closing off open ends of the channel. No coupler required. Push-on installation....Read More
Panduit® 4x4 End Cap Fitting
Model # FREC4X4YLThe complete selection of fittings feature bend radius control to prevent excessive bends in high performance copper and fiber optic cabling. The fitting is used for closing off open ends of the channe...Read More
Panduit® "L" Wall Mount Bracket for Fiber-Duct System
Model # FLBUsed to support 2x2 and 4x4 Fiber-Duct Systems by attaching to a wall or the front or back of an equipment rack. Contains hardware for mounting channel to bracket....Read More
Panduit® Fiber-Duct System Fitting-3-Sided BRC Trumpet Spillout for 2x2 Exit
Model # FTR2X2YLUsed to limit the bend radius of the cable to 2" (50.8mm) when exiting from a FiberRunner® Spill-Over FRSPYL or from 2x2 Fiber-Duct™ Channel....Read More
Panduit® Low Profile Reducer 4x4 to 2x2 for Vertical Tee
Model # FRLPR42BLAssembled into the vertical tee 6x4 system spillouts or 4x4 vertical tee with an audible snap, the low profile reducer 4x4 to 2x2 for vertical tee allows for the transition to 2x2 Fiber or 2x2 fiber channe...Read More
Panduit® Cable Management Bend Radius Control Clip
Model # CMSRC2Cable management bend radius control clip provides cable bend radius control and facilitates patch cable routing to and from horizontal cable management panels. Mounts directly to 19" or 23" EIA standar...Read More
Panduit® EIA/TIA Threaded Rod Mounting Bracket
Model # FEIAB58EIA/TIA Threaded Rod Mounting Bracket provides a vertical threaded rod stud to mount FiberRunner and fiber-duct threaded rod mounting brackets onto....Read More
Panduit® 6x4 Inside Vertical 45 Deg. Angle Fitting
Model # FRIV456X4YLThe complete selection of fittings feature bend radius control to prevent excessive bends in high performance copper and fiber optic cabling....Read More
Panduit® 6x4 FiberRunner System Fitting
Model # FROV456X4YLAttaches to 6x4 channel and/or fittings to create a 45 deg. downward angle from a straight horizontal run. Used with inside vertical 45 deg. angle fitting FRIV456X4YL to change level of a straight horizonta...Read More
Panduit® 6x4 FiberRunner System Fitting - Split Cover for Horz. Tee Fitting
Model # FRTSC6YLOptional split cover for the horizontal tee fitting FRT6X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4" (19mm) opening for easy access to ad...Read More
Panduit® 6x4 Snap-On Hinged Cover
Model # FRHC6The FiberRunner 6x4 Routing System is comprised of channel, fittings and brackets designed to segregate, route and protect fiber optic and high performance copper cabling runs to and between equipmen...Read More
Panduit® 6x4 FiberRunner System Fitting
Model # FRRA6X4YLAttaches to 6x4 channel and/or fittings to create a 90deg. horizontal turn from a straight horizontal run. Accepts optional split cover FRRASC6YL....Read More
Panduit® 4x4 FiberRunner System Fitting - Split Cover for Horz. Tee Fitting
Model # FRTSC4YLOptional split cover for the horizontal tee fitting FRT4X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4" (19mm) opening for easy access to ad...Read More
Panduit® 6x4 FiberRunner System Tee Fitting
Model # FRT6X4YLAttaches to 6x4 channel and/or fittings to create a 90 deg. horizontal branch from a straight horizontal run. Accepts optional split cover FRTSC6YL....Read More
Panduit® Split Cover for 12x4 Horizontal Right Angle Fitting
Model # FRRASC12Optional split cover for the horizontal right angle fitting FRRA12X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4" (19mm) opening for easy acces...Read More
Panduit® FiberRunner 12" X 4" Hinged Cover - 6' Length
Model # FRHC12YL6FiberRunner 6' Length 12" X 4" Hinged Cover is designed to cover FiberRunner 12" X 4" Channel....Read More
Panduit® 6x4 FiberRunner System Fitting - QuickLock Vertical Tee Fitting
Model # FRVT6X4YLAttaches to 6x4 channel and/or fittings to create 90° vertical drop from a straight horizontal run. Hinged door included. Accepts FIDT4X4BL, FTR4X4YL, S4X4YL6, or E4X4YL6 directly. Accepts optional snap-o...Read More
