Panasonic Closed Circuit Camera & Equipment Mounting Hardware
Panasonic Outdoor Corner Mount Adapter
Model # PACA2Constructed of aluminum, the PACA2 is a corner adapter designed to work with the POD-7CW dome housings....Read More
Panasonic Corner Mount Bracket
Model # PACA2BConstructed of aluminum, the corner mount bracket is a corner adapter designed to work with the POD8CWA dome housings....Read More
Panasonic Outdoor pole mount adapter
Model # PAPM3Aluminum pole mount adapter for POD-7CW, allows domes or housings to be mounted to an existing pole....Read More
Panasonic Bullet Resistant Housing
Model # PBRH10Bullet resistant housing for Panasonic standard body 1/3" CCD cameras with vari-focal lens and contains a 7 gauge steel housing body. Read More
Panasonic Indoor Corner Mount Adapter
Model # PCMA474FIndoor corner mount adapter for WV-CW244F and WV-CW474F. Read More
Panasonic Mount Bracket with Powder Coat
Model # PHM220Lightweight aluminum pole mount bracket with powder coat. Read More
Panasonic Mount Bracket with Powder Coat
Model # PHM240Lightweight aluminum pedestal mount bracket with powder coat. Read More
Panasonic Mount Bracket with Powder Coat
Model # PHM260Lightweight aluminum pole ceiling bracket with powder coat. Read More
Panasonic Metal Indoor Corner Housing
Model # PMCH8The metal indoor housing has been designed and engineered for Panasonic's standard body 1/3 cameras with fixed focallens series. The corner housing accommodates standard body fixed camera up to 8" in length. Read More
Panasonic Outdoor Dome Housing for Fixed Camera
Model # POD8CFOutdoor dome housing for Panasonic fixed cameras: WV-BP140 Series; WV-BP330 series; WV-CP240 series; WV-CP470 series; WV-CP254H and WV-NP472....Read More
Panasonic Outdoor Dome Housing for Unitized Camera (Wall Mount)
Model # POD8CWWall mount, outdoor dome housing for WV-CS564 / CS854A / CS854B / NS324 unitized dome camera systems. A heater and blower are standard on this model with 24-hour fan operation for effective heating an...Read More
Panasonic Outdoor Dome Housing for Fixed Camera (Wall Mount)
Model # POD8CWFWall mount, outdoor dome housing for Panasonic fixed cameras: WV-BP140 series; WV-BP330 series; WV-CP240 series; WV-CP470 series; WV-CP254H and WV-NP472. A heater and blower are standard....Read More
Panasonic Outdoor Dome Housing for Unitized PTZ Cameras
Model # POD9COutdoor dome housing for unitized PTZ cameras, including WV-CS954. The housing features 24 hour fan operation for effective heating and condensation protection and a thermostatically controlled 24VAC heater....Read More
Panasonic 11" Indoor/Outdoor Housing for 1/3" CCD Cameras with Fixed Lenses
Model # POH1000The indoor/outdoor environmental housing can accommodate Panasonic camera/lens combinations. The body is an attractive beige finish with black polycarbonate end caps....Read More
Panasonic 16" Indoor/Outdoor Housing for 1/3" CCD Cameras with Zoom Lenses
Model # POH1500The indoor/outdoor environmental housings can accommodate Panasonic camera/lens combinations. The body is an attractive beige finish with black polycarbonate end caps. The housing fits all current Panasoni...Read More
Panasonic Outdoor Pressurized Camera Housing
Model # PPH14The pressurized housing is designed to provide maximum protection for Panasonic cameras with fixed-focal length cameras or motorized zoom lens....Read More
Panasonic Outdoor Pole Mount
Model # PPM484SOutdoor pole mount designed specifically for the WV-CW484F/S, WV-NW484S, WV-CW244F/S, WV-CW474F/S cameras....Read More
Panasonic Pendant Mount Bracket
Model # PPMF12DPendant mount bracket and back-box for use with POD8C. Read More
Panasonic Parapet Mount Bracket (Inside Wall)
Model # PPRM30GFor parapet mounting situations, the PPRM30G/GB offers ease of installation and service. Designed to be used on either inside or outside roof top parapets, and a 1-1/2” pipe thread allows quick and eas...Read More
Panasonic Low Profile Recessed Ceiling Housing
Model # PRC201CThe low profile recessed ceiling housing is designed for use in suspended or sheet rock ceiling applications. Units are sized for use with a solid state 1/2" or 1/3" camera and lens combination....Read More
