Allen Tel 42A Block to Modular Surface Jack Cover
Model # AT214C4Ivory cover has integral jack with spade-tipped leads. Converts existing 42A connecting blocks to modular. Read More
Allen Tel Modular Surface Jack, IDC
Model # AT625A3Modular surface jack consisting of a base equipped with a modular jack wired to punch down terminals similar to those used on 66-type blocks. An attractive snap-on cover completes the assembly. The AT6...Read More
Allen Tel Single Housing Faceplate
Model # AT33S-52A single housing faceplate designed for use with jack modules....Read More
Allen Tel 4 Prong Phone Jack
Model # AT404BPlastic assembly containing 4-spring type sockets with screw terminals designed to terminate 4-conductor inside wiring cable and to mate with an AT283B plug. Read More
Allen Tel Voice Connecting Block
Model # AT635C1Consists of a screw terminal base, modular jack and snap-on cover. Furnished in light ash color. Used for connecting registered voice equipment to the switched network. Typical use is the connection o...Read More
Allen Tel Versatap Duplex Surface Mount Faceplate
Model # AT33DVersatap duplex housing surface mount faceplate used with AT45MB back plates. Accepts all Versatap modules except blanks, coax connectors and AT55SH. Can be mounted directly to the wall. Read More
Allen Tel Surface Jack
Model # AT214BConsists of a modular jack permanently mounted into an ivory cover and a 42A4 or 42A6 connecting block. Read More
Allen Tel Modular Surface Jack with Screw Terminals
Model # AT468The 468 type surface jack provides a 4, 6 or 8 conductor modular jack housed in a plastic base with screw terminals. The plastic cover snaps on for convenience. Mounting screws and double sided tape ar...Read More
Panduit® NetKey 2-Port Surface Mount Box
Model # NK2BXWH-ANetKey 2-Port Surface Mount Box....Read More
Allen Tel Versatap 4 Port Surface Jack Housing
Model # AT44Versatap 4 port housing designed for use with Versatap Category 3 and 5 jack modules. Constructed of high impact self extinguishing plastic rated UL94V-9. Accepts all modules except BNC, TNC and AT55SH....Read More
Allen Tel Connecting Block
Model # AT42A4A 4 or 6-terminal connecting block consisting of brass threaded inserts molded into a plastic base. Furnished with cover, terminal screws and washers. Used primarily to terminate inside wiring telephon...Read More
Allen Tel Versatap Single Surface Mount Jack Housing
Model # AT33SVersatap single housing surface mount housing used with AT30M back plates. Accepts all Versatap modules except blanks, coax connectors and AT55SH. Read More
Leviton Blank Module
Model # 4129Blank modules for extra/empty Multimedia Outlet Systems (MOS) wallplates. Available in 1/2, 1-1/2 and 2 units high. Read More
Allen Tel 6-Wire 6-Position Modular Jack
Model # AT523A66-wire, 6-position line jack for base of wall telephone. Read More
Panduit® NetKey 4-Port Surface Mount Box
Model # NK4BXAW-AYNetKey 4-Port Surface Mount Box....Read More
Allen Tel Shuttered Surface Mount Box for Versatap Modules
Model # AT33-6Shuttered surface mount box for six versatap modules...Read More
Commscope M101 Type Modular Surface Mount Box
Model # M101SMB-B-003Modular Surface Mount Box is designed for use with one modular information outlet (copper or fiber)....Read More
Allen Tel Surface Mount IDC Wall Jack
Model # AT103103 type single port surface jack provides one voice or data jack mounted in a plastic base with a screw on cover and 110 internal connector for 26 - 22 AWG solid wire. Mounting screws and double side...Read More
AT888 Shown Allen Tel Modular Duplex Surface Jack
Model # AT444Common base equipped with two modular jacks, associated integral screw type terminal blocks and a common snap-on cover. Station wire entry may be made from one side. Furnished with both mounting screw...Read More
Leviton 2-Port Angled QuickPort Adapter - 45 Degree Exit
Model # 41294-2QFits into QuickPort Multimedia Outlet System (MOS) wallplates. Makes it possible to gain an extra 2, 45 degree ports. Read More
