Chatsworth Grounding and Bonding Solutions
Chatsworth Products Copper-to-Copper Joint Compound
Model # 40168Recommended for all copper-to-copper connections, copper threads and all mechanical/pressure type grounding connections....Read More
Chatsworth Products Compression Lugs
Model # 40162Compression Lugs connect electrical wires to copper or tinned copper conductors....Read More
Chatsworth Products C-Type Compression Taps
Model # 40163C-Type Compression Taps connect two copper conductors with the use of a hydraulic crimping tool. Read More
Chatsworth Products Two Mounting Hole Ground Terminal Block
Model # 40167Chatsworth's Two Mounting Hole Ground Terminal Block provides a convenient way to attach ground wires to racks or cabinets and meets BICSI and ANSI/EIA/TIA two-hole mounting recommendations. Constructe...Read More
Chatsworth Products Aluminum Stand-Off Tie Bracket
Model # 10559These brackets mount to the back of the rack channel to provide a convenient point to tie-down cable runs....Read More
Chatsworth Products Mounting Screws - Pan Head / Pilot Point
Model # 40605#12-24 combination pan head, pilot point mounting screws attach equipment to racks and cabinets. Available in packages of 50ea or 1,000ea. A cutting notch in the thread removes paint in threaded hole...Read More
Chatsworth Products One Mounting Hole Ground Terminal Block
Model # 08009Provides a convenient way to attach ground wires to racks or cabinets using (1) #12-24 screw (not included). Holds up to (2) #4 gauge wires....Read More
Chatsworth Products Stand-Off Tie-Down "L" Bracket
Model # 10001Mounts to the back of the rack channel to provide a convenient tie-down point for grounding and bonding cable runs. Either end of the nylon bracket can be attached to the rack or cabinet face, allowin...Read More
Chatsworth Products Isolator Bar, Cable Runway
Model # 10842Electrically isolates cable runway sections, isolating grounded sections of runway or where strong EMI/RFI fields could generate eddy-currents, which could disturb down-line equipment....Read More
Mfg. List Price: $210.95
You Save: $181.13 (86%)
Chatsworth Products 9' Green Ground Jumper
Model # 40159Ground Jumpers provide common grounding from equipment rack or cabinet to halo conductor. Can be used with CPI "L" Brackets (model number: 10001-001 or 10559-500) to attach cable run vertically along equipmen...Read More
Mfg. List Price: $326.76
You Save: $294.78 (90%)
Chatsworth Products Cable Runway Ground Straps Kit
Model # 40164-001Cable Runway Ground Strap Kits provide a ground pathway between cable runway lengths when fastened together across splices. Installation requires drilling 5/16" holes. Ground Straps consist of an 8"-lon...Read More
Chatsworth Products Horizontal Rack Busbar
Model # 10610Provides electrical continuity from rack to rack. Constructed of 3/16"(thick) x 3/4"(high) hard-drawn electrolytic tough pitch 110 alloy copper bar with eight #6-32 tapped lug mounting holes on 1" center...Read More
Chatsworth Products Busbar Insulator Assembly
Model # 10622-000Standalone insulator assembly for busbars....Read More
Chatsworth Products Rack Base Insulator Kit
Model # 1060519", 23" and 25" rack base insulator kit electrically isolates the rack from the floor for and effective grounding and bonding system....Read More
Chatsworth Products Vertical Rack Busbar Kits
Model # 40161Vertical Rack Busbar Kits isolate the Busbar from the rack to help control current paths from passing through one piece of equipment to another....Read More
Chatsworth Products Telecommunications Grounding Busbars - EIA Standard
Model # 13622The new 13622-010 CPI Telecommunications Grounding Busbar (TGB) provides a central ground attachment point for telecommunications systems and other equipment....Read More
Chatsworth Products Busbar Kit, Wall-Mount
Model # 10622Insulated ground bus mounting plates specifically designed for commercial applications. The Hard-Drawn Electrolytic Tough Pitch 110 Alloy solid copper ground bars are 1/4" thick and stand off 2.75" fro...Read More
Chatsworth Products TMGB Pattern Busbar, 4"W x 1/4"H
Model # 40153The Telecommunications Main Grounding Busbar (TMGB) provides a central ground attachment point for telecommunications bonding backbones, equipment and the building's ground electrode system....Read More
Chatsworth Products Rack Busbar Insulator Block
Model # 40157Rack Busbar Insulator Blocks provide rigid support to physically separate Rack Busbars from all sources of electrical energy. Its offset design securely attaches the Busbar using a #12 self-tapping scre...Read More
Chatsworth Products Busbar Assemblies with Lug Kits
Model # 40156Busbar Assemblies With Lug Kits contains the Chatsworth Telecommunications Grounding Busbar (TGB) or Telecommunications Main Grounding Busbar (TMGB) along with required stainless steel hardware to faste...Read More
