Cable Supports, Clips and Clamps
Chatsworth Products Medium Sized Mag-Clips without Holes
Model # 17100Magnetic clips are designed to hold a 25-pair cable or several electrical cords. Keeps cables neat within workstation areas neat and off of the floor to reduce the danger of accidents. Read More
Chatsworth Products Aluminum Stand-Off Tie Bracket
Model # 10559These brackets mount to the back of the rack channel to provide a convenient point to tie-down cable runs....Read More
Chatsworth Products Medium Sized Mag-Clips with Holes
Model # 17000Magnetic clips are designed to hold a 25-pair cable or several electrical cords. Keeps cables neat within workstation areas neat and off of the floor to reduce the danger of accidents. Nylon cable tie...Read More
Chatsworth Products Jack Plate Wall Mounting Bracket
Model # 20502This innovative flush-mount wall board bracket is designed to hold round style modular jack plate assemblies. To install, simply drill a 2 3/8" diameter hole into dry wall, insert bracket into hole and...Read More
Chatsworth Products Stand-Off Tie-Down "L" Bracket
Model # 10001Mounts to the back of the rack channel to provide a convenient tie-down point for grounding and bonding cable runs. Either end of the nylon bracket can be attached to the rack or cabinet face, allowin...Read More
Chatsworth Products J-Hook Ceiling Cable Bracket
Model # 11322Designed to support heavy cable runs, such as multiple PBX cable, IBM cabling, etc. Easily routes cabling wherever ceiling support of heavy cable is required. Can also be suspended from threaded drop rods....Read More
Chatsworth Products Type A 4" x 4" Wall Cable Support Bracket
Model # 10921-500Designed to support heavy cable runs, such as multiple strand PBX cable, data cabling and coax, along walls or wherever wall support of heavy cable runs are needed....Read More
Chatsworth Products Type B 4" x 3 7/8" Wall Cable Support Bracket
Model # 10910-500Designed to support heavy cable runs, such as multiple strand PBX cable, data cabling and coax, along walls or wherever wall support of heavy cable runs are needed....Read More
Chatsworth Products Type A 4" x 7 3/4" Wall Cable Support Bracket
Model # 10920-500Designed to support heavy cable runs, such as multiple strand PBX cable, data cabling and coax, along walls or wherever wall support of heavy cable runs are needed....Read More
Chatsworth Products Type B 6" x 6" Wall Cable Support Bracket
Model # 10900-500Designed to support heavy cable runs, such as multiple strand PBX cable, data cabling and coax, along walls or wherever wall support of heavy cable runs are needed....Read More
Chatsworth Products Cable Strain Relief Bracket
Model # 11570Have you ever pulled cables out of rack-mounted equipment accidentally? Do you need to maintain a minimum bend radius for your cabling? Our rack- mounted cable strain relief may just be the answer. Mad...Read More
Garvin Direct Mount Bridle Ring (Package of 100)
Model # BR-150-SSC1-1/2" direct mount bridle ring with drive pin & washer attached for quick installation by a standard power actuated tool/gun. Package of 100. Read More
Garvin Drive Ring (Box of 25)
Model # DRVGalvanized nail on drive ring. Available 25 pieces per Box. Read More
Erico Beam Clamps Thru 1/2" Flange
Model # BCXXMThe "lightweight-heavyweight" alternative to malleable clamps for support of various components to beam. Pre-riveted combinations available....Read More
Erico Beam Clamp
Model # BC200-CDXBFit flanges up to 5/8" and accept 1/4"-20 threaded components. Available pre-riveted to conduit/pipe hangers up to 2"....Read More
Erico Combination Box/Conduit Hangers, 1/4-20 x 5/8" Stud (Bundle of 25)
Model # 812MB18SThe Combination Box/Conduit Hangers provide 66% less Drop Wires in rod/wire applications....Read More
Erico Snap-in J-Hook (Box of 40)
Model # CAT12ESCThe Snap-in J-Hook is the ideal solution for retrofit and add-on installations since it uses the existing strut framework. Available in a box of 40....Read More
Garvin 2" Bridle Ring With 4" Threaded leg and Toggle Wing
Model # BR-200-TW2" cable loop toggle wing set bridle rings have 3-1/2” long stranded threaded legs for hollow walls....Read More
Garvin Stamped Steel Beam Clamp With 3/4" Jaw Opening and 10-24 Threaded Holes
Model # BC-1024Garvin BC-1024 Stamped Steel Beam Clamp With 3/4" Jaw Opening and 10-24 Threaded Holes....Read More
Garvin Stamped Steel Beam Clamp With 3/4" Jaw Opening and 1/4-20 Threaded Holes (Package of 100)
Model # BC-1420Garvin BC-1420 Stamped Steel Beam Clamp With 3/4" Jaw Opening and 1/4-20 Threaded Holes (Package of 100)....Read More