Floor Jacks and Electrical Floor Boxes
Legrand - Wiremold RFB4 Series Four-Compartment Combination Floor Box
Model # RFB4RFB4 Series Four-Compartment Combination Floor Box....Read More
Legrand - Wiremold deQuorum™ Corded End Configuration
Model # KCM45CM2deQuorum™ Corded End Configuration delivers convenient access to vital services, including power, voice, and data, to meet the demands of today’s work environment....Read More
Legrand - Wiremold Walkerduct® Flanged Round Carpet/Tile Holder
Model # 10LHWalkerduct® Flanged Round Carpet/Tile Holder is designed for use with Walkerduct® Round Access Plate Junction Boxes (Model #: 14S and 222S and 3222FB)....Read More
Legrand - Wiremold Evolution Series Surface Style Cover with Solid Lid
Model # EFB610BTCEvolution Series Surface Style Cover with Solid Lid. Die cast aluminum cover assembly designed to be used on top of floor covering. Read More
Legrand - Wiremold Ratchet-Pro™ 881 Series Multiple Service Floor Box Cover Kit
Model # 881AV3CTCRatchet-Pro™ 881 Series Multiple Service Floor Box Cover Kit for carpet or tile installations. All cover plates are furnished with gasket and three screws....Read More
Legrand - Wiremold RFB9 and RFB11 Series Flush Tile or Carpet Cover Assembly, Brushed Aluminum
Model # RFB119BTCALFlush with floor, cast aluminum cover assembly with maximum load capacity 3,000 lbs....Read More
Legrand - Wiremold Walkerduct Pro Series Flush Carpet Plate with Double Duplex Opening
Model # 428DR2Walkerduct Pro Series Flush Carpet Plate with Double Duplex Opening. The flush flanges with interchangeable covers provide an aesthetic appearance that will please any architect or building owner....Read More
Legrand - Wiremold Tamper Resistant Evolution 8AT Series Flush Style Cover Assembly, Black
Model # 8CTBKTRTamper Resistant Evolution 8AT Series Flush Style Cover Assembly are a Die-cast aluminum cover assembly designed for use with 8STCP, 8STC, and 8STCPAV Poke-Thru Stem Assemblies....Read More
Legrand - Wiremold Evolution 6AT Series Surface Style Cover Assembly, Nickel
Model # 6CTCNKEvolution 6AT Series Surface Style Cover Assembly are a Die-cast aluminum cover assembly designed for use with 6STCP, 6STC, and 6STCPAV Poke-Thru Stem Assemblies....Read More
Legrand - Wiremold AF3 Lower (Bottom) Panel Single Gang Plate
Model # SGB-3TJSingle-Gang Plate – Accepts three Ortronics TracJack™ Inserts Read More
Legrand - Wiremold RFB9 and RFB11 Series Two-Gang Sectional Device Plate
Model # RFB119-AAPTwo-gang sectional device plate. Holds three (3) Extron Electronics AAP devices....Read More
Legrand - Wiremold RFB9 and RFB11 Series Blank Device Plate
Model # RFB119-SBOne-gang blank device plate in sectional widths. Read More
Legrand - Wiremold RFB9 and RFB11 Series Spacer Plate
Model # RFB119-SPACERUsed to close off openings when certain combinations of standard width device plates leave open spaces. Four (4) spacer plates are included with the RFB11 and two (2) with the RFB9. Read More
Legrand - Wiremold RFB9 and RFB11 Series Series GFI Receptacle Device Plate
Model # RFB119-SGFISingle-gang sectional (SGFI) width device plate. Read More
Legrand - Wiremold RFB9 and RFB11 Series Duplex Receptacle Device Plates
Model # RFB119-SDSingle-gang sectional (SD) width device plate. Read More
Legrand - Wiremold Evolution 6AT Series Bottom Housing Assembly
Model # 152CHA152CHA is a one and a half-gang 2" trade size conduit housing assembly. Recommended for use with furniture feed devices. Covers the center compartment and one of the side compartments. Read More
Legrand - Wiremold 8AT Series Device Mounting Plate
Model # 8DEC8AT series device mounting plate is a singlegang device plate that will accept Decorator style devices such as 20A receptacles, GGCIs, 106 adapters or A/V devices....Read More
Legrand - Wiremold RFB9 and RFB11 Series Blank Device Plate
Model # RFB119-BTwo-gang blank device plate in sectional (SB) widths. Read More
Legrand - Wiremold RFB9 and RFB11 Series Communication Device Plate
Model # RFB119-RTAvailable in standard width. Provided with one opening to accept one Ortronics TracJack bezel and one Ortronics Series II bezel. Will accept up to six Ortronics TracJack devices or up to three dual Ortronic...Read More
Legrand - Wiremold Ratchet-Pro 881 Series Divider Plate
Model # 881-DIVUsed to isolate power and communication compartments....Read More