Quick Reference for "N" and "D" Speakerphone Models

I) Programming

allen tel n, allen tel d, allen tel, AllenTel Speakerphone must be programmed remotely from a separate line, using any Touchtone Telephone.

This reference works with the following phones:

Note: During program mode, a beep must be heard before programming, phone can be disconnected at any time by pressing *, #, *, *.

To set Receiving Level
Press #, #, 61, XX, *, # (Where XX= between 00 and 99)
To set Transmit Level
Press #, #, 62, XX, *, #. (Where XX= between 00 and 99)
Length of Call (Default=2 minutes)
Press #, #, 63, XX, YY, *, #. (Where XX=minutes and YY= seconds)

II) How to set your Security Code (optional) by default, phone has no security code setting.

Press #, #, 76, #, 56, enter 4-digit code, *, #. (If used, remember the numbers)

III) How to Deactivate the security code

Press #, enter your 4-digit code, #, 76. (1 beep + 3 beeps= Deactivate)

IV) Programming Example (with Security code)

To Program Length for a Call for 3 minutes and 45 seconds

Press #, enter your 4-digit code, #, 63, 03, 45, *, #.

Products

Outdoor Speakerphone w/Tone Dial
(Model #GB97DXX)

Outdoor Speakerphone w/No Dial Pad
(Model #GB97NXX)

Outdoor Speakerphone w/No Dial Pad/S.S. Hasp
(Model #GB25900NXX)

Outdoor Speakerphone w/Tone Dial/S.S. Hasp
(Model #GB25900D)

Elevator/Hall Speakerphone w/2 Minute Auto-Disconnect
(Model #GB555N)

Emergency Telephone w/ Outlet Box Less Frame
(Model #GB2555)

Mini-Elevator/Hall Speaker Phone w/2 Min Automatic Disconnect For ARD Circuits
(Model #GB31454)

Mini-Elevator/Hall Speakerphone
(Model #GB31560)

Outdoor Speakerphone w/No Dial Pad/No Housing
(Model #GB25900N-LH)

Outdoor Speakerphone w/Tone Dial Pad/No Housing
(Model #GB25900D-LH)