The KCS-1ARD Color Video Sentry set is a video entry system with one video door station and one inside monitor/handset station. The video room station is equipped with a 4” flat color monitor, connected to a video door station located at an entry area and a white illuminator LEDs, turning on automatically in low light conditions for better viewing at night. The video door station contains a CCD chip camera with illumination LEDs for low light applications. The camera is designed with a Tilt mechanism, allowing the viewer inside to adjust the camera’s angle upwards by 40 degrees.
The inside monitor includes a door release button, which can be used to activate an electric door strike. Brightness, contrast, and chime volume controls are located on the bottom of the monitor. Any incoming call from the door station sounds a 4 stroke chime. The monitor comes on displaying the image of the caller and the person at the inside station picks up to answer, and the visitor speaks hands free. The entry area can be monitored by pressing the “monitor” button on the room station. This allows both audio and video monitoring (remains on for approximately 30 seconds). The KCS-1ARD Set includes 1 KC-DAR door station, 1 KC-1MRD monitor, and PS-2410A power supply.
Features
- KCS-1ARD Set includes 1 KC-DAR door station, 1 KC-1MRD monitor, and PS-2410A power supply
- Clear and crisp color image with 4" TFT display and Digital Signal Processor
- Hands free Audio and Video monitoring when door calls or when Monitor button is pressed
- Video images from door can be recorded with the KC-32EU
- Compact surface mount color video door station (KC-DAR)
- Adjust vertical angle of camera for better viewing
- Illuminating LED's for viewing in low light conditions
- Door release activation from inside station
| Specifications | |
|---|---|
| Power Source | 24V DC, supplied by PS-2410A.
KC-1MRD: 700mA. |
| Video Monitor | 4" TFT color LCD |
| Call-in from Door | 4-stroke chime |
| Night Viewing | Built-in light is projected up to 12" from camera. Outside area beyond 12" cannot be seen |
| Image View Area | Approx. 2' horizontal, 3'8" ~ 7'9" Vertical (At 4'3" high and 20" from camera) |
| Door Release | Contact rating: 12V AC, 400mA. |
| Wiring | 2 conductor, 18AWG, non-shielded (Use Aiphone #841802.)
2 wires to power supply. (Use Aiphone #841802 ) |
| Distance | KC-1MRD to door: 165' with 22AWG wire, 330' with 18AWG. |
System Layout:
