|
MRP-SS Surge Suppressor: MPR-SS transient voltage surge suppressor provides protection for MPR Series Modules when mounted in raceways. Mounts in integral J-Box with supplied double-stick tape, use one per circuit.
|  | ||||||
|
J Series Jumpers: J series jumpers connect power modules, providing AC power to all modules on the same circuit. Pre-terminated jumpers feature convenient genderless 30 amp connectors at both ends and are sold in packs of six.
|  | ||||||||||||
Master / Slave Jumper for Power Modules :
Allows M Series slave modules to be switched remotely by an RLM, RM or R Series Master Module.
| Master Slave Jumper | ||
|---|---|---|
| Part # | Jumper Length | Quantity |
| JMS-12X6 | 12" | sold in packs of 6 |
|
T Series Tails: T series tails connect incoming power to a single circuit within a raceway. One tail required per circuit. Each tail features a pre-terminated 30 amp connector that plugs in to a module at one end, and wire tails for J-box connection on the other. Sold in packs of six.
|  | ||||||||||||
Universal Sequencing Controller & Remote Wallplate Keyswitch:
Universal Sequencing Controller:
The USC-6R Universal Sequencing Controller provides 6-step sequencing control to any AC power distribution system that can be controlled by either switch closure or 12 volt DC. Sequencing can be initiated locally via a convenient front panel switch, as well as remotely via our wallplate keyswitch (USC-KL) or any momentary dry-contact closure switch. Featuring an interval delay selector of 1, 3, or 6 seconds between sequence steps, the unit additionally provides 4 different start delay settings, allowing up to three USC-6R units to be interconnected to operate as a single 18 step unit. Occupying one rackspace, the USC-6R front panel includes individual channel LED status indicators, as well as master power, local sequence initiation, and interval delay controls. 9” deep, finished in a durable black powder coat.
Remote Wallplate Keyswitch:
The USC-KL provides remote up/down sequence initiation via a secure keyswitch. Status LED indicators also provided and connect to our USC-6R Universal Sequencing Controller via a convenient RJ-45 jack.
USC Image Part # Description Steps Control Outputs 
USC-6R Universal Sequencing Controller 6 individually sequenced 12 volt DC and switch closure 
USC-KL Remote wallplate keyswitch with LED status indicators
