Switchable power modules allow quick and easy shop or field wiring of vertical power raceways. An extensive selection of both 15 amp and 20 amp modules allow the installer to configure each raceway to fit the application, with single or multiple circuits and a choice of control options. All modules utilize a unique genderless 30 amp coupler to daisy-chain AC power to other modules on the same circuit. Modules fit our MPR Series raceways, are manufactured from galvanized steel and feature a durable min-spangle finish.

RLM Series:
RLM Series Modules can be switch remotely vai 12 volt DC or dry closure, as well as with the local switch provided. Units provide dry contact status output, and include a local status LED.

RLM Series
Image	Stand-Alone Part#	Module Part #	Amperage	Control	Status
	RLM-15-1C	RLM-15	15	remote 12 Volt DC, dry closure, local switch	LED & dry contact
	RLM-20-1C	RLM-20	20	remote 12 Volt DC, dry closure, local switch	LED & dry contact
		RLM-20IG	20/Isolated Ground	remote 12 Volt DC, dry closure, local switch	LED & dry contact

M Series:
M Series Modules are always on and cannot be switched remotely. Units do not provide status indication.

M Series
Image	Stand-Alone Part#	Module Part #	Amperage	Control	Status
	M-15-1C	M-15	15	always on	none
	M-20-1C	M-20	20	always on	none
		M-20IG	20/Isolated Ground	always on	none

30 Amp MPR Series Power Modules:
30 Amp MPR power modules shall be Middle Atlantic Products model #RLM30-L530-1 (accepts 30 Amp twistlock plug) / RLM30-L520-1 (accepts 20 Amp twistlock plug). Modules shall be capable of being controlled locally or remotely by using any controller that sends 12-volt DC or contact closure outputs. 30 amp power modules shall mount in rack or on any surface. Modules shall incorporate “soft” start functionality to prevent high in-rush current, feature integral arc suppression for increased contact life and dual 30 amp relays for intrinsic reliability. 1/2” and 3/4” knockouts shall be located on the sides and bottom for wiring to power source. 30 Amp power module shall be UL Listed in both the US and Canada.

RLM30-L530-1 Accepts NEMA L-530 30 Amp twist lock plugs. The 30 Amp MPR series Stand Alone Power Modules provide switchable power distribution for components requiring 30 Amp power. Controlled locally or remotely by using Middle Atlantic Products universal sequencing controller (USC06R or by any controller that sends 12 volt DC or contact closure outputs. RLM30-L520-1 Accepts NEMA L520 20 Amp twist lock plugs. Internal Components and wiring capable of 30 Amps. Ideal for applications where amplifiers draw 20 Amps of current, but greater reliability of switching is needed.

FC Series:

The FC Series progressive thermostatic fan controller extends equipment life and reduces service calls by varying the fan speed of up to four fans based upon temperature. The fan controller has 3 temperature ranges and can be set to operate the fan speed either proportional to temperature, or to come on full speed when the temperature threshold has been reached. This UL Listed device can also be turned on or off via a local switch, and includes status LEDs. The fan controller can be mounted to rackrail brackets or any flat surface, and is also available as an MPR series module and is manufactured from galvanized steel with a durable min-spangle finish. A temperature probe is provided with a 5 ft. wire. This controller is designed to work specifically with fans that are offered by Middle Atlantic Products, or other fans with similar specifications. Max load 1 amp/120 volts. FC Series Module Part # Amperage Control Status FC-4 15 temperature probe & local switch LED

Modular Power Raceway System

Design and build a custom power distribution system

Modular Raceway Wiring & Accessories

Jumpers, Tails, Keyswitchs, and more..