The Mighty Mo 10, the next generation of Legrand / Ortronics® advanced cable management system, is the first system to combine enhanced cable management with superior airflow in a rack. For efficient cooling, proper airflow must be maintained in the room, in underfloor and overhead plenums, and within the cable management rack. The preferred method of cooling in today’s data centre is the cold-aisle/hot-aisle approach.

The Mighty Mo 10 is ideal for maintaining cold-aisle/hot aisle airflow, whether your network equipment is front-to-back, bottom or side venting. The Mighty Mo 10 features honeycomb side rails and baffles that redirect airflow from side vented equipment from the cold aisle to the hot aisle. The perforated side rails allow ventilated air to be exhausted, while the baffles ensure the proper flow of air from cold aisle to hot aisle, even with side ventilation. This passive system eliminates the additional 15 to 20 W of power that typical fans consume, making for a more energy-efficient data centre with reduced power consumption and energy costs.

Three key factors are essential considerations when evaluating cable management systems for today’s data centre, storage area networks (SAN), and large premise networks.

  • Airflow
    The heat generated from increased server densities and higher speed network equipment makes cooling a top concern for today’s IT administrators and data center managers. With heat being the most common reason for equipment failures, proper cooling is essential to reliable operations. Designed specifically to improve airflow, Legrand / Ortronics® Mighty Mo 10 cable management system enables more efficient cooling and reduces power consumption.
  • Density
    Mighty Mo cable management systems are fully equipped to handle the density of today’s high performance networks while allowing for easy moves, adds, and changes. Both the Mighty Mo 10 and Mighty Mo 6 systems provide ample capacity for a minimum of 48 Category 6a patch cords per rack unit on a single side of the equipment, which is often necessary to avoid a fan tray, power supply or other removable part of the equipment.
  • Protection & Performance
    To ensure maximum network performance, MightyMo cable management systems protect patch cords, cable, and equipment ports from damage by maintaining proper bend radius requirements, reducing tension on plugs and jacks, protecting network equipment ports, and supporting large cable bundles within the rack.

Advanced Cable Management Systems

Mighty Mo 10 Cable Management Racks
  • OR-MM10716
  • 412.75 mm channel depth, 2135 mm high, black, 45 rack units

    Mighty Mo 10 racks are designed to maximize the airflow of network equipment. Honeycomb side rails and baffles combine to manage intake and exhaust air creating cold aisle/hot aisle air distribution from side vented equipment. The bottom flange turns inward, allowing it to fit on a 610 x 610 mm floor tile.
    Mighty Mo 10 Cable Management Cage With Door
  • OR-MM10VMD712
  • With door, 308.1 mm x 330.2 mm x 2135 mm, 45 rack units

    Cage design promotes efficient routing of patch cords between racks. Hinged doors allow easy access during moves, adds, and changes. 406.4 mm wide cage creates a 311.15 mm gap between racks. 304.8 mm wide cage creates a 209.55 mm gap between racks for front-to-back routing of equipment cables and patch cords. Both are supplied with four spools and 12 bend-limiting clips.