Chatsworth Products, Inc. (CPI) Seismic Protection Systems reduce the risk of equipment damage by stiffening, bracing and stabilizing racks and rack-mounted equipment to comply structural recommendations. When planning installations in seismically active regions, CPI helps reduce the approval cycle by obtaining Office of Statewide Health Planning and Development (OSHPD) Pre-Approval (OPA) numbers for several IT infrastructure products. In compliance with earthquake design criteria, CPI’s Seismic Systems protect equipment so it remains operational when subject to earthquakes.

CPI Seismic Protection Systems include the following benefits:

• Reduces the risk of equipment damage due to seismic events
• Minimizes excessive motion that may cause undue strain on cable connections
• Increases chance of continued operations after seismic event
• Helps installations meet seismic codes

Seismic Products for Racks – reinforces rack from top to bottom

• Adjustable wall/ceiling braces stabilize tops of racks and frames
• Gusset kits support up to 300 lb of equipment on CPI's Universal Rack
• Installation kits secure racks to both concrete and wood floors
• Raised floor supports anchor racks to subfloor
• Heavy-duty top angles provide extra support
• Tie-down brackets protect shelf-mounted equipment

Seismic Products for Cabinets - ensures the stability of cabinets and equipment

• Seismic Frame® Cabinet System is Zone 4 rated and holds 800 lb of equipment
• Bracing kit attaches the top of the cabinet to the wall
• Equipment brackets prevents excessive movement of rack-mounted equipment
• Tie-down kit keep monitor securely fastened to shelf

Seismic Products for Cable Runway – reinforces cable runway

• Heavy-Duty Junction-Splice Kit – to connect ladder racks at 90-degree horizontal intersections when supporting heavy cable runs or when used in earthquake areas
• Heavy-Duty Butt-Splice Kit – for straight connections when supporting heavy cable runs or when used in earthquake areas
• Single & Double Earthquake Bracing Kits - for stabilizing cable runway hung from threaded rods
• Wall Angle Support Kit – to support cable runway terminating perpendicular to the wall
• Threaded Drop Rods - threaded rod to support cable runway from ceilings

Seismic Protection for Racks Universal Earthquake Bracing Kit: Adjustable bracket for bracing an equipment rack or auxiliary frame to wall or ceiling to meet earthquake safety codes. Part Number Description 10562-001 Universal Earthquake Bracing Kit *Note: Additional installation hardware is required. Rack Seismic Gusset Kit and Hardware Kit: The Rack Seismic Gusset and Hardware Kit can be added to any CPI Universal Rack (46XXX series) to stiffen critical load bearing joints, reducing the need to stabilize the top of the rack. Part Number Description 11592-X01 Gusset and Hardware Kit; consists of: (4) welded steel bolt-on gussets (8) 1/2-13 x 1- 1/4” bolts and (8) 1/2-13 nuts *X=color, 1=Gray, 2=White, 7=Black. Rack and Frame Installation Kits: Secure equipment racks and cabinets to the floor. Part Number Description 40604-003 Concrete Floor Kit 40607-001 Wood Floor Kit Raised Floor Rack Support: Used to support equippment racks installed on access floor systems. Kits include pre-cut threaded rod, brackets and hardware. Part Number Description 10630-119 19” Rack, 3”D channel, 16” to 22”H floor 10630-123 23” Rack, 3”D channel, 16” to 22”H floor 11762-119 19” Rack, 6”D channel, 16” to 22”H floor 11762-123 23” Rack, 6”D channel, 16” to 22”H floor Equipment and Tower CPU Adjustable Tie-Down Brackets: Secures equipment from being moved or bumped by seismic activity. Part Number Description 12086-X19 Tower CPU Adjustable Tie-Down Bracket, 19” Rack 12086-X23 Tower CPU Adjustable Tie-Down Bracket, 23” Rack 11349-X19 Desktop CPU Tie-Down Bracket, 19” Rack 11349-X23 Desktop CPU Tie-Down Bracket, 23” Rack *X=color, 1=Gray, 2=White, 3=Clear, 7=Black. Adjustable Monitor Strap Shelf for Racks: Secure CRT style monitors to shelves Part Number Description 11725-X01 Tie-Down Kit without shelf 11628-X19 19”W Shelf with Tie-Down Kit 11628-X23 23”W Shelf with Tie-Down Kit *X=color, 1=Gray, 2=White, 3=Clear, 7=Black.

Seismic Protection for Cabinets Seismic Frame Cabinet System: Rated Zone 4 compliant, designed to withstand the seismic stress of an 8.3 Richter scale earthquake. Part Number Description 11972-X42 19”W x 36”D x 84”H, with side panels 11973-X42 19”W x 36”D x 84”H, without side panels 11974-X42 19”W x 36”D x 84”H, frame only *X=color, 1=Gray, 2=White, 3=Clear, 7=Black. Seismic Equipment Bracket for Cabinets: Secure equipment on shelves. Part Number Description 14061-X19 19”W, 15” to 32” D 14061-X23 23”W, 15” to 32” D Seismic Monitor Tie-Down Kit for Cabinets: Secures equipment from being moved or bumped by seismic activity. Part Number Description 11725-X01 Monitor Tie-Down Kit 12495-X19 19”W x 24”D Monitor Shelf + Keyboard Tray 12334-X19 19”W x 24”D Solid Shelf 12335-X19 19”W x 24”D Vented Shelf *X=color, 1=Gray, 2=White, 3=Clear, 7=Black. Other shelves available. Adjustable Bracing Kit for Cabinets: Secure the top of the cabinet to a wall. Part Number Description 12477-X19 19”W, 24” to 36” D 12477-X23 19”W, 24” to 36” D Seismic Protection for Runway Splice Kits: Connect Cable Runway together. Part Number Description 11299-X01 Heavy-Duty Butt-Splice Kit 16299-X01 UL Classified Heavy-Duty Butt-Splice Kit 11298-001 Heavy-Duty Junction Splice Kit 16298-001 UL Classified Heavy-Duty Junction Splice Kit Earthquake Bracing Kits: Stiffening brackets for threaded rod supports. Part Number Description 10695-001 Single Earthquake Brace 11421-XXX Double Earthquake Brace Wall Angle Support Kit for Runway: Secures the end of cable runway to the wall. Part Number Description Direct Connect Wall Angle Support *X=color, 0=Gold, 2=White, 7=Black. Widths ranging from 4” to 24” available.