Cablofil has the most complete line of wall attachment hardware. Many of these brackets feature Cablofil's patented FAS system for attaching tray directly to the wall bracket without any additional hardware. Cablofil wall brackets reduce install time and saves labor costs.
FAS L Bracket
FAS L - Wall Bracket
Features:
- For installation of EZ Tray onto walls and attachment to underfloor pedestals
- Reduce installation time - patented FAS style attachment holds cable tray secure without nuts and bolts
- Corrosion resistant pre-galvanized finish
Click here for FASL Bracket specifications PDF
FAS Universal Bracket
FAS U - Universal Bracket
Features:
- For cable tray installation onto walls or channel framing
- Patented FAS style attachment hold cable tray secure without nuts and bolts
- Designed to also accept bolt attachment
- Corrosion resistant pre-galvanized finish
Click here for FASU Universal Bracket specifications PDF
CRP Reinforced Bracket
CRP - Reinforced Bracket
Features:
- Hot dipped galvanized after fabrication for corrosion resistance
- Fits on 1 5/8" wide channel framing
- To secure tray support: use 1 fastener set (EZBN1-4 and CE 25) for tray widths up to 8" and 2 fasteners for tray widths up to 12"
- Nuts, bolts and washers sold seperately
Click here for CRP Reinforced Bracket specifications PDF
CS Bracket
CS - Slotted bracket used to mount cable trays to walls, ceilings or under floor pedestals
Featues:
- For use with cable tray widths up to 12"
- Use 1 fastener set (EZBN1-4 and CE25) for tray widths up to 8"
- Use 2 fastener sets (EZBN1-4 and CE25) for tray widths up to 12"
- Corrosion resistant pre-galvanized finish
- Nuts, bolts, and washers sold seperately
Click here for CS Bracket specifications PDF
C50 Wall Mount Attachment
C50 - Wall Mount Attachment
Features:
- Attaches 2" tray to wall
- No screws required for tray attachment, crimp to connect
- Corrosion resistant pre-galvanized finish
- Attaches boxes to tray for connections and conduit dropouts
Click here for C50 Wall Mount Attachment specifications PDF
PAT 30 Suspension Shoe
PAT 30 - Suspension Shoe
Features:
- Works with CAT 30 for trapeze hanging 2" EZ Tray
- Accepts 1/4" threaded rod
- Use EZBN1-4 and CAT 30 for attachment (sold seperately)
CAT 30 Snap-In Wall Hanger Support
CAT 30 - Snap-In Wall Hanger Support
Features:
- Keeps 2" tray secure when attaching to supports
- Attaches 2" tray to wall
- No screws required for tray attachment, snap in place
- Corrosion Resistant pre-galvanized finish
- Can be used to support EZ Tray to channel firming or to walls
Click here for CAT30 Snap-In Wall Hanger Support specifications PDF
UC 50 Support for 2" EZ Tray
UC 50 - Support for 2" EZ Tray
Features:
- Attaches 2" EZ Tray to cabinet tops and channel framing
- Fold over tabs secure tray without fasteners
Click here for UC50 Support for 2" EZ Tray specifications PDF
|
Email Page
